[Log] [Infinity CM2SP2] Hisense A5 Pro CC Firmware Backup
[Log] [Infinity CM2SP2] Hisense A5 Pro CC Firmware Backup
30-07-2026, 06:30 PM
Code:
Card found : 36D3BC2F , v0149
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13
Load IDBase v8331 Ok!
Operation : Identify [ v2.13 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Product Brand : Hisense
Product Model : HLTE203T
Product Device : HLTE203T
Product Name : HLTE203T
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
Ver. Incmt : L1732.6.01.02
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-04-05
Build Time : 24.05.2020
Product Info : HLTE203T
Build Time : 24.05.2020
Product Board : HLTE203T
Board Platform : ums512
Product Manfct : Hisense
NVMng : SecurityInfo
IMEI[1] : ***************
IMEI[2] : ***************
SEC : SLS:0, SKS:0, SKV:4
Platform Version: MOCORTM_19C_W20.18.4_Debug
Project Version: sharkl5pro_pub
BASE Version: FM_BASE_19C_W20.18.4
HW Version: sharkl5pro_modem
CMP_Time : 04-30-2020 12:54:35
MODEM TAG : MOCORTM_19C_W20.18.4_Debug_FM_BASE_19C_W20.18.4_sharkl5pro_modem_sharkl5pro_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:03:55
Operation : Read FW [ v2.13 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Read FW [ v2.13 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Product Brand : Hisense
Product Model : HLTE203T
Product Device : HLTE203T
Product Name : HLTE203T
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
Ver. Incmt : L1732.6.01.02
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-04-05
Build Time : 24.05.2020
Product Info : HLTE203T
Build Time : 24.05.2020
Product Board : HLTE203T
Board Platform : ums512
Product Manfct : Hisense
AndroidVer : 10
VlnrLevel : 0x02
UMS512__10__QP1A.190711.020__HLTE203T
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : teecfg.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : agdsp_l.bin
Read : cdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : deltanv_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : socko.img
ExtSparse : Compression ratio : 60%
Read : odmko.img
ExtSparse : Compression ratio : 2%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 6%
Read : phase.cfg
Read : super.img
Read : kdebuginfo.bin
ExtSparse : Compression ratio : 96%
Read : u-boot-spl.bin
Firmware size : 0x152D1A38C ( 5.29 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:44:11Attached Files
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
