Android Headunit sc9863a android 9 bootloop after install magic.
Android Headunit sc9863a android 9 bootloop after install magic.
23-08-2025, 11:04 PM
Witam wszystkich.
Odblokowałem bootloader i zrootowałem radio samochodowe z Androidem za pomocą procesora UNISOC sc9863a. Wszystko działało dobrze. Następnie zainstalowałem Magisck i po ponownym uruchomieniu radio zatrzymało się na logo Androida z komunikatem „Bootloader odblokowany”. Fastboot i ADB nie działają. Niestety, oprogramowanie układowe, które posiadam, nie jest w formacie PAC. Radio jest wykrywane jako SPRD U2S. Czy ktoś może mi pomóc w uruchomieniu go za pomocą Cheetah Tool Pro? Nie mam oprogramowania układowego PAC.
Publikuję system, którego obecnie używam.
Attached Files
23-08-2025, 11:05 PM
I unlocked the bootloader and rooted my Android car radio with a UNISOC sc9863a processor. Everything was fine. Then I installed Magisck, and after restarting, the radio stuck on the Android logo with the message "Bootloader Unlocked." Fastboot and ADB don't work. Unfortunately, the firmware I have isn't in PAC format. The radio is detected as SPRD U2S. Can anyone help me use Cheetah Tool Pro to get it working? I don't have PAC firmware.
I'm posting the system I'm currently using.
Attached Files
23-08-2025, 11:07 PM
I unlocked the bootloader and rooted my Android car radio with a UNISOC sc9863a processor. Everything was fine. Then I installed Magisck, and after restarting, the radio stuck on the Android logo with the message "Bootloader Unlocked." Fastboot and ADB don't work. Unfortunately, the firmware I have isn't in PAC format. The radio is detected as SPRD U2S. Can anyone help me use Cheetah Tool Pro to get it working? I don't have PAC firmware.
I'm posting the system I'm currently using.
Attached Files
23-08-2025, 11:10 PM
I unlocked the bootloader and rooted my Android car radio with a UNISOC sc9863a processor. Everything was fine. Then I installed Magisck, and after restarting, the radio stuck on the Android logo with the message "Bootloader Unlocked." Fastboot and ADB don't work. Unfortunately, the firmware I have isn't in PAC format. The radio is detected as SPRD U2S. Can anyone help me use Cheetah Tool Pro to get it working? I don't have PAC firmware.
I'm posting the system I'm currently using.
Attached Files
25-08-2025, 06:16 PM
(23-08-2025, 11:07 PM)jarzur Hello everyone.
..
I'm posting the system I'm currently using.
Fixing this is possible depending on the available files.
I've sent you a PM
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
