Hovatek Forum HARDWARE Boxes and Dongles Flash error Unisoc module
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Flash error Unisoc module

Flash error Unisoc module

rayg
rayg
rayg
Newbie
2
19-09-2023, 01:21 AM
#1



Need sone help with Elite OctaMax.
Someone flashed wrong boot.img
I have a backup I made with Unisoc module..
ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
Error untill sending boot, aborting.
Total Time: 00:00:02
Done.

Anyway of fixing this?

Thank you..
AutoResponder
AutoResponder
AutoResponder
Verified Account
609
19-09-2023, 01:21 AM
#2
Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote
maxpayne
maxpayne
maxpayne
Intern
3,628
21-09-2023, 02:17 PM
#3
(19-09-2023, 01:21 AM)rayg Need sone help with Elite OctaMax.
Someone flashed wrong boot.img
I have a backup I made with Unisoc module..
ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
Error untill sending boot, aborting.
Total Time: 00:00:02
Done.

Anyway of fixing this?

Thank you..

Which tool was used to flash the wrong boot.img

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
rayg
rayg
rayg
Newbie
2
22-09-2023, 10:11 PM
#4
Fastboot was used..

maxpayne
(19-09-2023, 01:21 AM)rayg Need sone help with Elite OctaMax.
Someone flashed wrong boot.img
I have a backup I made with Unisoc module..
ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
Error untill sending boot, aborting.
Total Time: 00:00:02
Done.

Anyway of fixing this?

Thank you..

Which tool was used to flash the wrong boot.img


(21-09-2023, 02:17 PM)maxpayne
(19-09-2023, 01:21 AM)rayg Need sone help with Elite OctaMax.
Someone flashed wrong boot.img
I have a backup I made with Unisoc module..
ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
Error untill sending boot, aborting.
Total Time: 00:00:02
Done.

Anyway of fixing this?

Thank you..

Which tool was used to flash the wrong boot.img


(21-09-2023, 02:17 PM)maxpayne
(19-09-2023, 01:21 AM)rayg Need sone help with Elite OctaMax.
Someone flashed wrong boot.img
I have a backup I made with Unisoc module..
ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
Error untill sending boot, aborting.
Total Time: 00:00:02
Done.

Anyway of fixing this?

Thank you..

Which tool was used to flash the wrong boot.img


(21-09-2023, 02:17 PM)maxpayne
(19-09-2023, 01:21 AM)rayg Need sone help with Elite OctaMax.
Someone flashed wrong boot.img
I have a backup I made with Unisoc module..
ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
Error untill sending boot, aborting.
Total Time: 00:00:02
Done.

Anyway of fixing this?

Thank you..

Which tool was used to flash the wrong boot.img
maxpayne
maxpayne
maxpayne
Intern
3,628
28-09-2023, 01:54 PM
#5



(22-09-2023, 10:11 PM)rayg Fastboot was used..

Try to use CM2 to backup the bricked phone. Check if you get the same error.
The backup you are trying to flash, was it made from this phone before it got bricked?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl