rooting hisense f23
rooting hisense f23
03-06-2021, 04:08 PM
(02-06-2021, 10:07 AM)X3nonoh ok i see what you mean, cause i thought i had to read the block map and enter start and end memory address for my scatter file.Ok will proceed on your post now and see if i encounter errors.The python and everything is working great but gonna do waht you said now(01-06-2021, 04:07 PM)kronos yes it was said to go to this tool and look at the memory address and the second attachment mine shows no data so i cannot edit the temp scatter file
the instruction at step 8 @ https://www.hovatek.com/forum/thread-21970.html is to see how readback is done with sp flash tool, you're to skip everything pertaining to mtk droid tool
again it's indicated in the requirements section @ https://www.hovatek.com/forum/thread-526.html ; to skip mtk droid tool if using wwr mtk
PS : watch the video guide for wwr mtk to understand better
03-06-2021, 11:54 PM
(03-06-2021, 04:08 PM)kronospython is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup(02-06-2021, 10:07 AM)X3nonoh ok i see what you mean, cause i thought i had to read the block map and enter start and end memory address for my scatter file.Ok will proceed on your post now and see if i encounter errors.The python and everything is working great but gonna do waht you said now(01-06-2021, 04:07 PM)kronos yes it was said to go to this tool and look at the memory address and the second attachment mine shows no data so i cannot edit the temp scatter file
the instruction at step 8 @ https://www.hovatek.com/forum/thread-21970.html is to see how readback is done with sp flash tool, you're to skip everything pertaining to mtk droid tool
again it's indicated in the requirements section @ https://www.hovatek.com/forum/thread-526.html ; to skip mtk droid tool if using wwr mtk
PS : watch the video guide for wwr mtk to understand better
This post was last modified: 03-06-2021, 11:58 PM by kronos.
Attached Files
04-06-2021, 12:30 PM
(03-06-2021, 11:54 PM)kronos python is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup
you should attach a full screenshot of sp flash tool window along with the error message
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
04-06-2021, 03:31 PM
(04-06-2021, 12:30 PM)X3nonok gonna do it again and send screen shots(03-06-2021, 11:54 PM)kronos python is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup
you should attach a full screenshot of sp flash tool window along with the error message
04-06-2021, 03:56 PM
(04-06-2021, 03:31 PM)kronosok this is all the information i can provide you whats actually happening.i hope this can help you.Do you want the scatter file also(04-06-2021, 12:30 PM)X3nonok gonna do it again and send screen shots(03-06-2021, 11:54 PM)kronos python is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup
you should attach a full screenshot of sp flash tool window along with the error message
This post was last modified: 04-06-2021, 03:58 PM by kronos.
Attached Files
05-06-2021, 12:12 PM
(04-06-2021, 03:56 PM)kronos ok this is all the information i can provide you whats actually happening.i hope this can help you.Do you want the scatter file also
retry again using empty scatter file made from wwr v2.51
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
05-06-2021, 11:12 PM
(05-06-2021, 12:12 PM)X3nonOk gonna create an empty scatter file(04-06-2021, 03:56 PM)kronos ok this is all the information i can provide you whats actually happening.i hope this can help you.Do you want the scatter file also
retry again using empty scatter file made from wwr v2.51
will let you know on the progress
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
