[odicamillo]

Hi.

I am trying to write the OPEN EU NT Code in a LG G7 ThinQ LMG710EM (TIM Branded) whose original NT Code is "1","222,01F",FFFFFFFF,FFFFFFFF,FF" because I cross flashed the original Oreo firmware with the OPEN EU version without any problem but updating now to the Android 10 OPEN EU version at every boot I get the "Warning, Current version is not available for user. Can't find matched carrier. Check NT-Code: 22201 : FF".

Unfortunately following your instructions, whatever KDZ I try, I end up with the following line in the PDM file:
NT Code Read,invaild response - "1","222,01F,FFFFFFFF,FFFFFFFF,FF". So I understand that the PDM procedure is not able to write the new NT Code.

Do you have any suggestion? What can I do to eliminate that annoying warning message?

Thank you in advance.

[hovatek]

Hi.

I am trying to write the OPEN EU NT Code in a LG G7 ThinQ LMG710EM (TIM Branded) whose original NT Code is "1","222,01F",FFFFFFFF,FFFFFFFF,FF" because I cross flashed the original Oreo firmware with the OPEN EU version without any problem but updating now to the Android 10 OPEN EU version at every boot I get the "Warning, Current version is not available for user. Can't find matched carrier. Check NT-Code: 22201 : FF".

Unfortunately following your instructions, whatever KDZ I try, I end up with the following line in the PDM file:
NT Code Read,invaild response - "1","222,01F,FFFFFFFF,FFFFFFFF,FF". So I understand that the PDM procedure is not able to write the new NT Code.

Do you have any suggestion? What can I do to eliminate that annoying warning message?

Thank you in advance.

1. Was the firmware flashed using chiperase?
2. Can you access the hidden LG Menu https://www.hovatek.com/forum/thread-38874.html

[odicamillo]

Hi.

I am trying to write the OPEN EU NT Code in a LG G7 ThinQ LMG710EM (TIM Branded) whose original NT Code is "1","222,01F",FFFFFFFF,FFFFFFFF,FF" because I cross flashed the original Oreo firmware with the OPEN EU version without any problem but updating now to the Android 10 OPEN EU version at every boot I get the "Warning, Current version is not available for user. Can't find matched carrier. Check NT-Code: 22201 : FF".

Unfortunately following your instructions, whatever KDZ I try, I end up with the following line in the PDM file:
NT Code Read,invaild response - "1","222,01F,FFFFFFFF,FFFFFFFF,FF". So I understand that the PDM procedure is not able to write the new NT Code.

Do you have any suggestion? What can I do to eliminate that annoying warning message?

Thank you in advance.

1. Was the firmware flashed using chiperase?
2. Can you access the hidden LG Menu https://www.hovatek.com/forum/thread-38874.html

Thank you for you reply.

1. Not at all. I always used the "refurbish" or "update" options to write the kdz. More recently I tried the PDM process following your instructions.

2. Yes, I can. I also tried to write the OPEN EU NT Code in the Service menù but also in this case I get a "NTCode write error".

[X3non]

Thank you for you reply.
1. Not at all. I always used the "refurbish" or "update" options to write the kdz. More recently I tried the PDM process following your instructions.

2. Yes, I can. I also tried to write the OPEN EU NT Code in the Service menù but also in this case I get a "NTCode write error".

are you able to write anything else other than nt code using the pdm feature?
try flashing using chiperase then retry using the pdm function again

[odicamillo]

Thank you for you reply.
1. Not at all. I always used the "refurbish" or "update" options to write the kdz. More recently I tried the PDM process following your instructions.

2. Yes, I can. I also tried to write the OPEN EU NT Code in the Service menù but also in this case I get a "NTCode write error".

are you able to write anything else other than nt code using the pdm feature?
try flashing using chiperase then retry using the pdm function again

When I use the PDM process all the other data seem to be written (or rewritten) without errors.

You mean that I have to use chiperase instead of refurbish/update to write a kdz?
Should I backup with a dump all the current firmware?

Thanks.

[hovatek]

When I use the PDM process all the other data seem to be written (or rewritten) without errors.

You mean that I have to use chiperase instead of refurbish/update to write a kdz?
Should I backup with a dump all the current firmware?

Thanks.

Its always a good idea to backup if you can

[thainhattam]

If it has the option to fix the serial number (S / N) that's fine

it doesn't, to fix s/n you'll need an external tool for sending at commands e.g putty, terminal or dc unlocker

Hi bro
Can you send me a txt file containing these AT commands, how can I generate it, thanks
https://www.youtube.com/watch?v=dXtFGeg9d3E

[hovatek]

Hi bro
Can you send me a txt file containing these AT commands, how can I generate it, thanks
https://www.youtube.com/watch?v=dXtFGeg9d3E

https://www.hovatek.com/forum/thread-38871.html

[odicamillo]

When I use the PDM process all the other data seem to be written (or rewritten) without errors.

You mean that I have to use chiperase instead of refurbish/update to write a kdz?
Should I backup with a dump all the current firmware?

Thanks.

Its always a good idea to backup if you can

I tried to use the dump process but I get the following error also when I select just one partition to dump:
"Error:0x80000119, unlock failed for dump limitation".

So I am not able to do a proper backup and now I hesitate to use the chiperase process...

Any suggestion?
Thank you.

[X3non]

I tried to use the dump process but I get the following error also when I select just one partition to dump:
"Error:0x80000119, unlock failed for dump limitation".

So I am not able to do a proper backup and now I hesitate to use the chiperase process...

Any suggestion?
Thank you.

dump doesn't work on all, just ensure that you are using the latest firmware version for your model / carrier