Doogee S88 Pro, Error 0xC002002A.
Doogee S88 Pro, Error 0xC002002A.
(27-10-2020, 05:09 PM)JordanV-Qc(27-10-2020, 04:28 PM)X3nonoooo , thanks , now i got somewhere .(27-10-2020, 01:18 PM)JordanV-Qc(27-10-2020, 12:56 PM)X3nonexactly the firmware im trying and i get the same error https://ibb.co/VVTHzKd(26-10-2020, 08:54 AM)Dogmatize Now i can flash rom with miracle box but it still continous bootloop. And got error "bad state Your device has failed verification and may not work properly"
How can i fix this problem? and i can not get into fastboot, recovery mode and can not power off the device.
Thankyou in advance.
the firmware you flashed doesn't seem complete, no system.img
ensure to flash full firmware ; you can try the firmware listed @ https://www.hovatek.com/forum/thread-15929.html
doesnt seem to have a system.img
super is the replacement for system & vendor in android 10
it's included in the firmware's content, but doesn't seem included in the list of files you flashed. maybe disabled within the scatter
you can modify the scatter file using a text editor e.g notepad++
ensure that is_download : true for super, vbmeta_system and vbmeta_vendor partitions
also specify the filenames, save and exit then reselect the scatter file
so yeah i changed the 3 lines , and unchecked the .img that was doing an error .;
https://ibb.co/hdKdSMj
https://ibb.co/0sp4Ldk <<<that one is because the phone didnt have enough power so it stopped mid-download.
https://ibb.co/j4BKxh8
Now the phone is back to factory , with one exeption ;
now on the screen there is a "Not verifiy" ;
https://ibb.co/GM7fRrK
But the phone is ok!
EDIT: ok it doesnt detect the sim card no more ....
both IMEI are unknown
(27-10-2020, 05:09 PM)JordanV-Qc ...
(29-10-2020, 01:38 AM)annan101 how did you edit the scatter file using notepad++ to read the download : true for super, vbmeta_system and vbmeta_vendor partitions plz help dont know how to do that
(28-10-2020, 10:23 AM)X3non(27-10-2020, 05:09 PM)JordanV-Qc ...
not verify, see https://www.hovatek.com/forum/thread-324...#pid187751
imei, ensure the device has a valid baseband then see https://www.hovatek.com/forum/thread-116.html
(29-10-2020, 03:35 AM)JordanV-Qc(28-10-2020, 10:23 AM)X3non(27-10-2020, 05:09 PM)JordanV-Qc ...
not verify, see https://www.hovatek.com/forum/thread-324...#pid187751
imei, ensure the device has a valid baseband then see https://www.hovatek.com/forum/thread-116.html
that seem to be the problem , there is no baseband , and i cant seem to find the file to flash for it , in mtk engineer mode i dont even have the option in connectivity .
i tried to flash nvram and data but it doesnt seem to do anything .
Edit; also i dont seem to find secro.img? is that a problem ?
(29-10-2020, 03:35 AM)JordanV-Qc that seem to be the problem , there is no baseband , and i cant seem to find the file to flash for it , in mtk engineer mode i dont even have the option in connectivity .
...
(14-03-2021, 07:16 PM)DessEttore Hello I have a similar problem my phone is in bootloop impossible to restart or turn it off I would like to know how to flash it because I also cannot find how to open it to disconnect the battery, all this after the recovery flash...
Thanks !