[AhmedKamal]

I have Huawei E8372h-153 locked ? 
I need to use with another network
When i insert different sim card required unlock code
Please help

[X3non]

I have Huawei E8372h-153 locked ? 
I need to use with another network
When i insert different sim card required unlock code
Please help

what is the firmware version of your device?

[AhmedKamal]

Software version : 21.321.01.00.37

Web UI version : 17.100.15.03.37

[X3non]

Software version : 21.321.01.00.37

Web UI version : 17.100.15.03.37

WARNING: try at your own risk

huawei datacard driver @ [ Login / Register to download free]
fc serial drivers @ [ Login / Register to download free]
bos fix (if you bootshot and device isn't detected properly) @ [ Login / Register to download free]
balong downloader @ [ Login / Register to download free]
bootshot @ https://i2.wp.com/routerunlock.com/wp-co...ot-Pin.png
usblsafe @ [ Login / Register to download free]
modified firmware @ [ Login / Register to download free]
dc unlocker @ dcunlocker official website

flashing the firmware will be similar to the procedure carried out @ https://www.hovatek.com/forum/thread-16772.html


To unlock the device use the AT command

Code:

AT ^ NVWREX = 8268.0.12.1.0.0.0.2.0.0.0, A, 0.0.0

[AhmedKamal]

Software version : 21.321.01.00.37

Web UI version : 17.100.15.03.37

WARNING: try at your own risk

huawei datacard driver @ [ Login / Register to download free]
fc serial drivers @ [ Login / Register to download free]
bos fix (if you bootshot and device isn't detected properly) @ [ Login / Register to download free]
balong downloader @ [ Login / Register to download free]
bootshot @ https://i2.wp.com/routerunlock.com/wp-co...ot-Pin.png
usblsafe @ [ Login / Register to download free]
modified firmware @ [ Login / Register to download free]
dc unlocker @ dcunlocker official website

flashing the firmware will be similar to the procedure carried out @ https://www.hovatek.com/forum/thread-16772.html


To unlock the device use the AT command

Code:

AT ^ NVWREX = 8268.0.12.1.0.0.0.2.0.0.0, A, 0.0.0

thank you bro for the response but for me these steps are difficult to implement thanks again