STOCKROM for HUAWEI Y5 Lite DRA-LX5 1.0.0.121(C185)

[josephfsiame]

Hi,
Anyone with stockrom for HUAWEI Y5 Lite DRA-LX5  1.0.0.121(C185)

I want to format my phone

[xerxes]

Hi,
Anyone with stockrom for HUAWEI Y5 Lite DRA-LX5  1.0.0.121(C185)

I want to format my phone

what's wrong with the phone and how did the problem begin?

[josephfsiame]

It is asking to enter pin or verify the Google account at some point.
In which the previous owner can not remember it.

[X3non]

It is asking to enter pin or verify the Google account at some point.
In which the previous owner can not remember it.

verify the google account during initial setup? if yes then you need to remove frp which doesn't necessarily require firmware
you can either readback or readinfo from your device to verify the frp start and length address then format frp partition using sp flash tool
or try the frp bypass as seen in the video

[josephfsiame]

It is asking to enter pin or verify the Google account at some point.
In which the previous owner can not remember it.

verify the google account during initial setup? if yes then you need to remove frp which doesn't necessarily require firmware
you can either readback or readinfo from your device to verify the frp start and length address then format frp partition using sp flash tool
or try the frp bypass as seen in the video

[X3non]

Good morning,Thanks for the below info and video crip.  But unfortunately all the methods have failed to work.Could it be possible to guide me step by step ton how to go about this other procedure you talked about (you can either readback or readinfo from your device to verify the frp start and length address then format frp partition using sp flash tool)I will really appreciate

download da for your model from the list @ https://www.hovatek.com/forum/thread-23321.html
you can either make a firmware backup using miracle thunder @ https://www.hovatek.com/forum/thread-13347.html or backup using wwr_mtk @ https://www.hovatek.com/forum/thread-21970.html
you'll get a scatter file upon successfully completing the backup, use the info from the scatter file to format ONLY frp partition using the guide @ https://www.hovatek.com/forum/thread-21638.html