Hovatek Forum MOBILE Android [Tutorial] How to build an FRP & Privacy Protection Password bypass PAC file
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to build an FRP & Privacy Protection Password bypass PAC file

[Tutorial] How to build an FRP & Privacy Protection Password bypass PAC file

hovatek
hovatek
hovatek
Administrator
49,570
12-02-2020, 03:06 PM
#1



This guide will explain how to use Research Download tool to create a pac file which can bypass Factory Reset Protection (FRP) and Privacy Protection Password on a Unisoc / Spreadtrum (SPD) Android device.

Requirements


How to create an FRP & Privacy Protection Password bypass PAC file


Follow the steps below to build a pac file which can bypass Factory Reset Protection (FRP) and Privacy Protection Password

See the video tutorial below or @ https://youtu.be/I5mm1YgKpo8


  1. Launch Research Download tool

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-1.png]

  2. Click Load Packet

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-2.png]

  3. Highlight the pac file and click Open

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-3.png]

  4. Wait while the pac file gets loaded


  5. Once the pac is loaded, click Settings


    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-4.png]

  6. Under the Main Page tab, untick Select All Files (only FDL 1 & FDL 2 will remain ticked)

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-5.png]

  7. Tick the box in front of Persist and double-click its FileName field

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-6.png]

  8. Click the browse icon

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-7.png]

  9. Highlight the persist.img and click Open. Do the same for ProdNV (i.e load prodnv.img)

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-8.png]

  10. Tick the following boxes: EraseUBOOTLOG, EraseRuntimeNV, EraseMisc and UBOOT_LOADER

    [Image: How-to-build-FRP-Privacy-Protection-Pass...file-9.png]

  11. Click Packet at the bottom

    [Image: How-to-build-FRP-Privacy-Protection-Pass...ile-10.png]

  12. Click Yes if prompted to do packeting operation now


    [Image: How-to-build-FRP-Privacy-Protection-Pass...ile-11.png]

  13. Click Yes if prompted about NV warnings

    [Image: How-to-build-FRP-Privacy-Protection-Pass...ile-12.png]

  14. Enter a name, version and select the destination for your pac file to be saved to then click OK

    [Image: How-to-build-FRP-Privacy-Protection-Pass...ile-13.png]

  15. Click OK once you see Packeting Complete

    [Image: How-to-build-FRP-Privacy-Protection-Pass...ile-14.png]

  16. You should now find the pac file in the specified location

    [Image: How-to-build-FRP-Privacy-Protection-Pass...ile-15.png]


Important Notice
  • Ensure to disable prodnv backup when flashing the pac file to bypass Privacy Protection Password
  • If you encounter Incompatible Partition while trying to flash the pac file then follow this fix
This post was last modified: 12-02-2020, 03:16 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
mrlone1997
mrlone1997
mrlone1997
Techie Member
73
12-02-2020, 05:03 PM
#2
reserved..thanks
Dilone61
Dilone61
Dilone61
Experienced Member
91
15-09-2020, 05:43 AM
#3
Works like a charm... thanks.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram