[Tutorial] How to build an FRP & Privacy Protection Password bypass PAC file
[Tutorial] How to build an FRP & Privacy Protection Password bypass PAC file
12-02-2020, 03:06 PM
This guide will explain how to use Research Download tool to create a pac file which can bypass Factory Reset Protection (FRP) and Privacy Protection Password on a Unisoc / Spreadtrum (SPD) Android device.
Requirements
- A PAC file for your device model
- prodnv.img and persist.img backed up from a working device of the same model
- Download Research Download tool
How to create an FRP & Privacy Protection Password bypass PAC file
Follow the steps below to build a pac file which can bypass Factory Reset Protection (FRP) and Privacy Protection Password
See the video tutorial below or @ https://youtu.be/I5mm1YgKpo8- Launch Research Download tool
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-1.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-1.png)
- Click Load Packet
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-2.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-2.png)
- Highlight the pac file and click Open
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-3.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-3.png)
- Wait while the pac file gets loaded
- Once the pac is loaded, click Settings
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-4.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-4.png)
- Under the Main Page tab, untick Select All Files (only FDL 1 & FDL 2 will remain ticked)
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-5.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-5.png)
- Tick the box in front of Persist and double-click its FileName field
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-6.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-6.png)
- Click the browse icon
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-7.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-7.png)
- Highlight the persist.img and click Open. Do the same for ProdNV (i.e load prodnv.img)
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-8.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-8.png)
- Tick the following boxes: EraseUBOOTLOG, EraseRuntimeNV, EraseMisc and UBOOT_LOADER
![[Image: How-to-build-FRP-Privacy-Protection-Pass...file-9.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-9.png)
- Click Packet at the bottom
![[Image: How-to-build-FRP-Privacy-Protection-Pass...ile-10.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-10.png)
- Click Yes if prompted to do packeting operation now
![[Image: How-to-build-FRP-Privacy-Protection-Pass...ile-11.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-11.png)
- Click Yes if prompted about NV warnings
![[Image: How-to-build-FRP-Privacy-Protection-Pass...ile-12.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-12.png)
- Enter a name, version and select the destination for your pac file to be saved to then click OK
![[Image: How-to-build-FRP-Privacy-Protection-Pass...ile-13.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-13.png)
- Click OK once you see Packeting Complete
![[Image: How-to-build-FRP-Privacy-Protection-Pass...ile-14.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-14.png)
- You should now find the pac file in the specified location
![[Image: How-to-build-FRP-Privacy-Protection-Pass...ile-15.png]](https://www.hovatek.com/blog/bpyeki/uploads/2020/02/How-to-build-FRP-Privacy-Protection-Password-bypass-PAC-file-15.png)
Important Notice
- Ensure to disable prodnv backup when flashing the pac file to bypass Privacy Protection Password
- If you encounter Incompatible Partition while trying to flash the pac file then follow this fix
This post was last modified: 12-02-2020, 03:16 PM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
