Hovatek Forum MOBILE Android V8 ROM MTK6260MA smartwatch??
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


V8 ROM MTK6260MA smartwatch??

V8 ROM MTK6260MA smartwatch??

Pages (2): 1 2 Next
sasa2701
sasa2701
sasa2701
Enthusiastic Member
7
31-01-2020, 02:00 PM
#1



Hi i need help i bought V8 smartwatch and flashed wrong firmware so my touch wont work after found working one on net,please can someone help me
to send me ROM for V8MTK6260MA.Searched everywhere and still cant find working one,i also have 1 same working watch and i did backup
got ROM0 but when i use extractor program it gives me some binary error.I uploadeded ROM for working one,can someone try to extract rom??
V8 backup
xerxes
xerxes
xerxes
Senior Member
8,357
31-01-2020, 10:15 PM
#2
(31-01-2020, 02:00 PM)sasa2701 Hi i need help i bought V8 smartwatch and flashed wrong firmware so my touch wont work after found working one on net,please can someone help me
to send me ROM for V8MTK6260MA.Searched everywhere and still cant find working one,i also have 1 same working watch and i did backup
got ROM0 but when i use extractor program it gives me some binary error.I uploadeded ROM for working one,can someone try to extract rom??
V8 backup

use wwr_mtk tool @ https://www.hovatek.com/forum/thread-21970.html or miracle thunder @ https://www.hovatek.com/forum/thread-13347.html to backup the working watch’s firmware.
This post was last modified: 31-01-2020, 10:15 PM by xerxes.
X3non
X3non
X3non
Recognized Contributor
22,062
31-01-2020, 11:47 PM
#3
(31-01-2020, 02:00 PM)sasa2701 Hi i need help i bought V8 smartwatch and flashed wrong firmware so my touch wont work after found working one on net,please can someone help me
to send me ROM for V8MTK6260MA.Searched everywhere and still cant find working one,i also have 1 same working watch and i did backup
got ROM0 but when i use extractor program it gives me some binary error.I uploadeded ROM for working one,can someone try to extract rom??
V8 backup

cut the readback using the tool attached and run the command below
Code:

fw_splitter rom_v8 -m
Attached Files
.zip
fw_splitter.zip
Size: 3.75 KB / Downloads: 69
sasa2701
sasa2701
sasa2701
Enthusiastic Member
7
01-02-2020, 12:56 AM
#4
(31-01-2020, 11:47 PM)X3non
(31-01-2020, 02:00 PM)sasa2701 Hi i need help i bought V8 smartwatch and flashed wrong firmware so my touch wont work after found working one on net,please can someone help me
to send me ROM for V8MTK6260MA.Searched everywhere and still cant find working one,i also have 1 same working watch and i did backup
got ROM0 but when i use extractor program it gives me some binary error.I uploadeded ROM for working one,can someone try to extract rom??
V8 backup

cut the readback using the tool attached and run the command below
Code:

fw_splitter rom_v8 -m
tnx but ehen i double click on program it just closes,when write to ms cmd theres error ,any advice?
This post was last modified: 01-02-2020, 01:39 AM by sasa2701. Edit Reason: error
X3non
X3non
X3non
Recognized Contributor
22,062
01-02-2020, 09:49 AM
#5



(01-02-2020, 12:56 AM)sasa2701 tnx but ehen i double click on program it just closes,when write to ms cmd theres error ,any advice?

you're not meant to launch the program but rather run the program using cmd / powershell
quick guide as seen below
  • copy fwsplitter into the same folder location of rom_v8 dump
  • open a cmd prompt window
  • change path to the folder location where you copied fwsplitter to

    Code:

    e.g
    cd C:\desktop\romdump

  • run the fwsplitter command

    Code:

    fw_splitter rom_v8 -m
sasa2701
sasa2701
sasa2701
Enthusiastic Member
7
01-02-2020, 04:55 PM
#6
(01-02-2020, 09:49 AM)X3non
(01-02-2020, 12:56 AM)sasa2701 tnx but ehen i double click on program it just closes,when write to ms cmd theres error ,any advice?

you're not meant to launch the program  but rather run the program using cmd / powershell
quick guide as seen below
  • copy fwsplitter into the same folder location of rom_v8 dump
  • open a cmd prompt window
  • change path to the folder location where you copied fwsplitter to

    e.gcd C:\desktop\romdump
  • run the fwsplitter command

    fw_splitter rom_v8 -m
sasa2701
sasa2701
sasa2701
Enthusiastic Member
7
01-02-2020, 04:57 PM
#7
(01-02-2020, 04:55 PM)sasa2701
(01-02-2020, 09:49 AM)X3non
(01-02-2020, 12:56 AM)sasa2701 tnx but ehen i double click on program it just closes,when write to ms cmd theres error ,any advice?

you're not meant to launch the program  but rather run the program using cmd / powershell
quick guide as seen below
  • copy fwsplitter into the same folder location of rom_v8 dump
  • open a cmd prompt window
  • change path to the folder location where you copied fwsplitter to

    e.gcd C:\desktop\romdump
  • run the fwsplitter command

    fw_splitter rom_v8 -m
I realy tried but i have some cmd error when i do it,im not realy good at cmd,is it maybe problem to you to try split my file and upload somewhere and send me download link of firmware?
sasa2701
sasa2701
sasa2701
Enthusiastic Member
7
01-02-2020, 05:24 PM
#8
(01-02-2020, 04:55 PM)sasa2701
(01-02-2020, 09:49 AM)X3non
(01-02-2020, 12:56 AM)sasa2701 tnx but ehen i double click on program it just closes,when write to ms cmd theres error ,any advice?

you're not meant to launch the program  but rather run the program using cmd / powershell
quick guide as seen below
  • copy fwsplitter into the same folder location of rom_v8 dump
  • open a cmd prompt window
  • change path to the folder location where you copied fwsplitter to

    e.gcd C:\desktop\romdump
  • run the fwsplitter command

    fw_splitter rom_v8 -m
Thank you i saved 1 watch and working fine,on another one there is only sound with blackscreen,but to be honnest i dod not do backup for that.I see its same chip but icons were bit different.Any advice?
X3non
X3non
X3non
Recognized Contributor
22,062
01-02-2020, 08:41 PM
#9
(01-02-2020, 05:24 PM)sasa2701 Thank you i saved 1 watch and working fine,on another one there is only sound with blackscreen,but to be honnest i dod not do backup for that.I see its same chip but icons were bit different.Any advice?

either you look for other v8 firmwares or firmwares mentioned to have worked for the v8 model to try OR look for another v8 watch to backup firmware from

here's a small list of firmwares you can try for V8
https://www.needrom.com/download/smartwa...indonesia/
https://drive.google.com/file/d/1MVnf-ok...Hy5rG/view
https://drive.google.com/file/d/1HnKqUQy...6pPkA/view
https://drive.google.com/file/d/19R-MSyc...F6Gx1/view
sasa2701
sasa2701
sasa2701
Enthusiastic Member
7
01-02-2020, 11:15 PM
#10
(01-02-2020, 08:41 PM)X3non
(01-02-2020, 05:24 PM)sasa2701 Thank you i saved 1 watch and working fine,on another one there is only sound with blackscreen,but to be honnest i dod not do backup for that.I see its same chip but icons were bit different.Any advice?

either you look for other v8 firmwares or firmwares mentioned to have worked for the v8 model to try OR look for another v8 watch to backup firmware from

here's a small list of firmwares you can try for V8
https://www.needrom.com/download/smartwa...indonesia/
https://drive.google.com/file/d/1MVnf-ok...Hy5rG/view
https://drive.google.com/file/d/1HnKqUQy...6pPkA/view
https://drive.google.com/file/d/19R-MSyc...F6Gx1/view
Already tried but nothing,all mtk6261, i take picture of chip you can look,you suggest to order another same watch with same mtk6260MA firmware will do the job???
.jpg
IMG_20200201_195225.jpg
Size: 90.13 KB / Downloads: 34
This post was last modified: 02-02-2020, 12:10 AM by sasa2701.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram