[hovatek]

Don't bother using hex if your phone  is pouvoir 4 and it show red state keep rebooting with no recovery neither fastboot ....just download Software download aftersale and download lower version firmware...And flash and it

Yes, Red State requires flashing the firmware

[Abdullah Zafar]

There are 2 sections above. 1 is removing the red/orange state, and second is about removing the 5seconds delay at startup. Now, if I removed the orange state by following the first section, is it still necessary to complete the second one afterward? Does the removal of orange state will also remove the 5 seconds delay?

[X3non]

There are 2 sections above. 1 is removing the red/orange state, and second is about removing the 5seconds delay at startup. Now, if I removed the orange state by following the first section, is it still necessary to complete the second one afterward?

If your goal is just to remove the orange state warning display then it's not compulsory to remove the delay time, 5 seconds might not even be noticeable

Does the removal of orange state will also remove the 5 seconds delay?

No, not unless you complete the steps for removing the delay time

[Abdullah Zafar]

got it, thank you so much

[Gamer prech]

Thanks for the reply, I have successfully removed the orange state warning. Thank you so much for sharing the post.

Sent from my TECNO ID5a using Hovatek Mobile

bro please i need the commands u used

[X3non]

bro please i need the commands u used

see the instructions on page 1

[Gamer prech]

bro please i need the commands u used

see the instructions on page 1

wait!
am i? supposed to input this command [adb shell su dd if=boot.img of=mount_point_of_boot] in adb without replacing
some code.?

[X3non]

wait!
am i? supposed to input this command [adb shell su dd if=boot.img of=mount_point_of_boot] in adb without replacing
some code.?

that was an example of flashing using adb dd, you're to change boot.img to your lk file and change mount point to the mount point of lk on your device
you can find out mount point of lk ; see https://www.hovatek.com/forum/thread-11203.html

[Brendanus]

@Hovatek - I find that the fix for removing the 5 second delay seems to work on the original Android 9 firmware of my Lenovo TB-8705F tablet, but not on the Android 10 update. The Lk.img file in A9 has the 08 B5 ** ** 7B 44 1B 68 1B 68 01 2B text, but it is not in the A10 version. The stub 7B 44 1B 68 1B 68 01 2B occurs 5 times in A9 (and the 5th one matches the 08 B5 ** ** prefix), but only 4 times in the A10 Lk file and none have the 08 B5 ** ** prefix. Any ideas?

[Chelebitech]

I have Oukitel C21 and the LK.BIN file has 2 places which 7B441B681B68012B hex code written and none of them has 08B5 ** ** in the begining. the two codes are;
D9FE 094B 7B441B681B68012B
9AFF 074B 7B441B681B68012B
Can anyone help?
Thanks.