[hovatek]

This guide will explain how to fix missing apps (half icon) on Infinix Qualcomm Android devices after flashing. It could also apply to other brands like Tecno, Itel etc.

In this scenario, you'll observe that some apps are missing after flashing:





One fix is to:

1. Backup the EFS / QCN
   
2. Wipe the system partition using Miracle Box (or any tool you choose) by going to Qualcomm tab > Read / Format Flash > Tick Read Partitions > Boot into EDL and connect phone to PC > Click Port > Click Start Button > Tick Wipe Selected > Select ONLY system partition > Click Start Button
   
3. Re-flash the firmware using HQXA
   

If this doesn't work for you, an easier approach is to:

1. Install adb on your PC then enable USB debugging on your phone
   
   
2. Download the Qualcomm Mode Change tool @ https://mega.nz/#!qpsXjYyS!oKkg1pak9wvUY...aNB1E9A1DI and extract it using 7zip
   
   
   
   
   
   
3. Launch SigMod.exe . You'll see two buttons. On the left is 用户模式  (User Mode) and on the right is 工厂模式 (Factory mode). Select User Mode
   
   
   
   
   
   
4. You should see Change Mode Success Close Diag Success Lock Diag Success. Reboot the phone after
   
   
   
   
   
   
5. Wait while the device starts up. You might see an Encrypting... screen. Wait till its done. If you see Encryption Unsuccessful then boot into recovery mode and do a factory reset
   
   
6. Once the device boots to home screen, you should now see all your apps
   
   
   
   
   
   

Thanks to GD_Mekail92 for uploading the tool

[linksboy]

work very well thanks

Sent from my SM-J7108 using Hovatek Mobile

[jdfm]

I get change command response error.... What could be wrong?

[X3non]

I get change command response error.... What could be wrong?

what's the phone model?
did you enable usb debugging? and did you accept debugging prompt?

[jdfm]

I get change command response error.... What could be wrong?

what's the phone model?
did you enable usb debugging? and did you accept debugging prompt?

Infinix X623, debugging enabled and giving access to...ie prompted!

[X3non]

Infinix X623, debugging enabled and giving access to...ie prompted!

if the tool doesn't work for you then use the other fix under the header "One fix is to" in the OP

[jdfm]

Infinix X623, debugging enabled and giving access to...ie prompted!

if the tool doesn't work for you then use the other fix under the header "One fix is to" in the OP

Thank yooooouuuuuuuuuuuuuu X3non...My device is back.

[Allan254]

...

Thank you guys you helped me fix my phone

[jordanweir]

Thanls massively for this.Helped save my phone back to life

[essenien]

gooooddd