Issue: How to unencrypt my mtk6763v soc device?
Issue: How to unencrypt my mtk6763v soc device?
(23-07-2019, 07:46 AM)licwo(23-07-2019, 06:18 AM)riadtaihiHi,(22-07-2019, 09:32 PM)X3nonHi, I can't format User data as it is encrypted.(22-07-2019, 10:51 AM)riadtaihi I can only mount the Micro SD card and System, but I cannot mount the userdata as it is encrypted and it shows in the TWRP a message to decrypt and then asks the password.
backup your files to your PC
download magisk.zip and no-verity-opt-encrypt-6.0.zip to ext_sdcard
format /data partition in twrp
flash no-verity-opt-encrypt.zip first
then flash magisk.zip
then reboot twrp and check if it still requests for data decryption or not
Did you flash patched boot img? If not check this thread: https://www.hovatek.com/forum/thread-21427.html
If your boot.img is patched then you will have access to TWRP. When entering into TWRP you will be asked with TWRP. Tap on cancel. The first thing you need to do after tapping cancel is Format Your device by using: Wipe >> Format Data >> Yes.
After format, you can use TWRP to either backup/flash ROMs.
Alternatively you can also flash no-verity-opt-encrypt and Magisk. Above method worked for me.
(23-07-2019, 06:18 AM)riadtaihi(22-07-2019, 09:32 PM)X3nonHi, I can't format User data as it is encrypted.(22-07-2019, 10:51 AM)riadtaihi I can only mount the Micro SD card and System, but I cannot mount the userdata as it is encrypted and it shows in the TWRP a message to decrypt and then asks the password.
backup your files to your PC
download magisk.zip and no-verity-opt-encrypt-6.0.zip to ext_sdcard
format /data partition in twrp
flash no-verity-opt-encrypt.zip first
then flash magisk.zip
then reboot twrp and check if it still requests for data decryption or not
(02-04-2021, 12:34 AM)gabstar I did as you said here still device still encrypted in TWRP loop. Using the TWRP file manager I noticed the boot folder is empty, should I flash the patched boot.img using TWRP?
(04-04-2021, 10:42 PM)kelvinchinedu I solve this issue just by wiping darvich,cache and system and Flash a treble based custom ROM like pixel experience or ressurecion remix through otg,and reboot to recovery and flash the so called lazy flasher .but make sure u backed up with wwr and sp . anytime I format my device or flash a firmware through sp am not getting any encryption message.