Tecno C7 Dead After Flashing

[Please help] Tecno C7 Dead After Flashing

mizozeko85
Enthusiastic Member

5

23-12-2018, 01:53 PM

#1

my camon c7's hios crashed and it got stuck at boot logo
i flashed it with the stock rom i got from hovatek
flashing was successful with no errors
it went dead, wouldnt come up, charge or respond on connection to my desktop
but it was still flash-able, so i downloaded the three stocks listed there and flashed them one after the other.

none yielded positive results

please help

xerxes
Senior Member

8,357

23-12-2018, 05:24 PM

#2

(23-12-2018, 01:53 PM)mizozeko85 my camon c7's hios crashed and it got stuck at boot logo
i flashed it with the stock rom i got from hovatek
flashing was successful with no errors
it went dead, wouldnt come up, charge or respond on connection to my desktop
but it was still flash-able, so i downloaded the three stocks listed there and flashed them one after the other.
none yielded positive results
please help

Did you take note of the phone's original build no before flashing the phone?
Try take out/reinsert the phone's battery and plug to charger for few hours, let's know the outcome

Sent from my M5 mini using Hovatek Mobile

EMMANUS
Senior Member

1,677

23-12-2018, 06:14 PM

#3

Carry out Innagee's suggestions and give feedback.

mizozeko85
Enthusiastic Member

5

23-12-2018, 06:25 PM

#4

(23-12-2018, 05:24 PM)innagee
(23-12-2018, 01:53 PM)mizozeko85 my camon c7's hios crashed and it got stuck at boot logo
i flashed it with the stock rom i got from hovatek
flashing was successful with no errors
it went dead, wouldnt come up, charge or respond on connection to my desktop
but it was still flash-able, so i downloaded the three stocks listed there and flashed them one after the other.
none yielded positive results
please help

Did you take note of the phone's original build no before flashing the phone?
Try take out/reinsert the phone's battery and plug to charger for few hours, let's know the outcome

Sent from my M5 mini using Hovatek Mobile

ok i will leave it charge for while
and unlucky it has stoped at the logo at the begining so i didn't get to check the build number
BTW i tried all the 3 firmwares here and still didn't work
to make a full image i formated the phone then flashed it

hovatek
Administrator

49,765

24-12-2018, 11:37 AM

#5

(23-12-2018, 06:25 PM)mizozeko85 ok i will leave it charge for while
and unlucky it has stoped at the logo at the begining so i didn't get to check the build number
BTW i tried all the 3 firmwares here and still didn't work
to make a full image i formated the phone then flashed it

better to disconnect / reconnect the battery so we'll be very sure and in the event of a next time, see https://www.hovatek.com/forum/thread-16005.html to get build number from a bricked phone (it will help)

mizozeko85
Enthusiastic Member

5

24-12-2018, 12:44 PM

#6

(24-12-2018, 11:37 AM)X3non
(23-12-2018, 06:25 PM)mizozeko85 ok i will leave it charge for while
and unlucky it has stoped at the logo at the begining so i didn't get to check the build number
BTW i tried all the 3 firmwares here and still didn't work
to make a full image i formated the phone then flashed it

better to disconnect / reconnect the battery so we'll be very sure and in the event of a next time, see https://www.hovatek.com/forum/thread-16005.html to get build number from a bricked phone (it will help)

ok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs

hovatek
Administrator

49,765

24-12-2018, 03:17 PM

#7

(24-12-2018, 12:44 PM)mizozeko85 ok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs

you can't get the original build number from this current device (you've already overwritten the OS). i only made the point so you'll take note of it incase you find yourself with a bricked device
have you disconnected / reconnected the battery yet?

mizozeko85
Enthusiastic Member

5

25-12-2018, 06:47 AM

#8

(24-12-2018, 03:17 PM)X3non
(24-12-2018, 12:44 PM)mizozeko85 ok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs

you can't get the original build number from this current device (you've already overwritten the OS). i only made the point so you'll take note of it incase you find yourself with a bricked device
have you disconnected / reconnected the battery yet?

Yes, i did and it didn't work

xerxes
Senior Member

8,357

25-12-2018, 10:59 AM

#9

(25-12-2018, 06:47 AM)mizozeko85
(24-12-2018, 03:17 PM)X3non

(24-12-2018, 12:44 PM)mizozeko85

ok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs

you can't get the original build number from this current device (you've already overwritten the OS). i only made the point so you'll take note of it incase you find yourself with a bricked device
have you disconnected / reconnected the battery yet?

Yes, i did and it didn't work

You'll need to look for and try as many firmware as you can find.
Did you try using a different battery?
Can you get access to a working device of the same model?

This post was last modified: 25-12-2018, 11:00 AM by xerxes.

hovatek
Administrator

49,765

26-12-2018, 10:56 AM

#10

(25-12-2018, 06:47 AM)mizozeko85 Yes, i did and it didn't work

I trust you did a factory reset (recovery mode) and wiped emmc (factory mode) if available.
You'll need to try as many C7 roms as you can find; including backups from working C7s around you

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions