[Please help] i have dead tecno w3 lte
[Please help] i have dead tecno w3 lte
(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???
(22-05-2018, 10:08 AM)hovatek(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???
1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?
(22-05-2018, 10:08 AM)hovatekmy mainboard is d2 not d1(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???
1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?
(23-05-2018, 10:57 PM)Koko Logy Moaiad(22-05-2018, 10:08 AM)hovatek(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???
1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?
IT WAS IN MY BACK BOKET,
NO IHAVE NOT BACK UP
NO I HAVE NOT NCK BOX, BUT I HAVE IT AS SOFTWEAR IN MY PC
(24-05-2018, 01:12 PM)innagee(23-05-2018, 10:57 PM)Koko Logy Moaiad(22-05-2018, 10:08 AM)hovatek(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???
1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?
IT WAS IN MY BACK BOKET,
NO IHAVE NOT BACK UP
NO I HAVE NOT NCK BOX, BUT I HAVE IT AS SOFTWEAR IN MY PC
Dump the phone's firmware in scatter format using miracle
Let's know once successful.
(25-05-2018, 11:44 PM)Koko Logy MoaiadCode:i dump my phone in nck EMMC: (57Gb+8192Mb) KSI 0x454838434538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045483843 : 000000000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM22)
Detected partitions count: 23
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start procesing nvram ......
Reading: BEGIN: 0x380000 - LEN: 0x500000
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start procesing boot ......
Reading: BEGIN: 0x1d80000 - LEN: 0x1000000
Start procesing recovery ......
Reading: BEGIN: 0x2d80000 - LEN: 0x1000000
Start procesing logo ......
Start procesing oemkeystore ......
Reading: BEGIN: 0x5000000 - LEN: 0x200000
Start procesing secro ......
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start procesing keystore ......
Reading: BEGIN: 0x5800000 - LEN: 0x800000
Start procesing tee1 ......
Reading: BEGIN: 0x6000000 - LEN: 0x500000
Start procesing tee2 ......
Reading: BEGIN: 0x6500000 - LEN: 0x500000
Start procesing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start procesing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start procesing metadata ......
Reading: BEGIN: 0x8b00000 - LEN: 0x2500000
Start procesing system ......
Reading: BEGIN: 0xb000000 - LEN: 0xc0000000
Backup cache disabled, we will skip it....
Backup userdata disabled, we will skip it....
Saved to : C:\Users\klm.KLM-PC\Documents\Android_MTK\firmware_backup\0-By CPU_MT6735_05_26_2018_00_05_51
Wait untill phone will start charging.
All done.
the backup have scatter file . but all file have no exetion not img or bin or no thing .what now??