Hovatek Forum MOBILE Android [Please help] Problem flashing Infinix X572
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Problem flashing Infinix X572

[Please help] Problem flashing Infinix X572

infinix572
infinix572
infinix572
Newbie
3
19-05-2018, 06:12 PM
#1



Hello ^_^

I have an Infinix x572 (upgraded to oreo) and I tried to downgrade it using SP flashtool, it seems that I forgot to install the vcom driver needed (x64) and I accidentally started the downgrade without it. I used another build # firmware, since I forgot to keep the build # before upgrading to oreo (Thank God I saved a copy of the build # of the oreo)

The flashing went on and gave me the 'download ok' message but the phone went dead and no power on. No charging either. And I can repeatedly hear the connect-disconnect sound on the PC when I connected it. Is it possible that my phone is as good as dead? Or is there any other solution that can be done? Please help....

Thanks in advance...

build # for oreo before dead phone - X572-H5312CE-O-108203V55
X3non
X3non
X3non
Recognized Contributor
22,062
19-05-2018, 06:22 PM
#2
(19-05-2018, 06:12 PM)infinix572 Hello ^_^
...
build # for oreo before dead phone - X572-H5312CE-O-108203V55

hold vol down button then connect the phone to a wall socket charger and leave to charge for some hours OR better still disconnect / reconnect the battery if you can just to be sure it isnt dead due to drained battery
BTW which rom build did you flash?
xerxes
xerxes
xerxes
Senior Member
8,355
19-05-2018, 06:23 PM
#3
(19-05-2018, 06:12 PM)infinix572 Hello ^_^

I have an Infinix x572 (upgraded to oreo) and I tried to downgrade it using SP flashtool, it seems that I forgot to install the vcom driver needed (x64) and I accidentally started the downgrade without it. I used another build # firmware, since I forgot to keep the build # before upgrading to oreo (Thank God I saved a copy of the build # of the oreo)

The flashing went on and gave me the 'download ok' message but the phone went dead and no power on. No charging either. And I can repeatedly hear the connect-disconnect sound on the PC when I connected it. Is it possible that my phone is as good as dead? Or is there any other solution that can be done? Please help....

Thanks in advance...

build # for oreo before dead phone - X572-H5312CE-O-108203V55

might be a drained battery issue or wrong firmware variant. 
try taking out/reinsert the battery then power on or plug the phone to charge for few hours, let's know the outcome.
This post was last modified: 19-05-2018, 06:24 PM by xerxes.
infinix572
infinix572
infinix572
Newbie
3
19-05-2018, 09:45 PM
#4
sorry the battery is built in I can't remove it Sad and the build # I flashed is X572-H5312CE-N-170704V63
infinix572
infinix572
infinix572
Newbie
3
19-05-2018, 09:49 PM
#5



and the battery did not drain until a couple of hours later, and the phone was still a little warm before. now I think its drained but is this really a battery issue? I only once flashed I successfully, though. The next time I tried (with the MTK drivers properly installed, at last) I can't get it started, it says it has dram failed to start (S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail)
hovatek
hovatek
hovatek
Administrator
49,570
21-05-2018, 10:46 AM
#6
(19-05-2018, 09:49 PM)infinix572 and the battery did not drain until a couple of hours later, and the phone was still a little warm before. now I think its drained but is this really a battery issue? I only once flashed I successfully, though. The next time I tried (with the MTK drivers properly installed, at last) I can't get it started, it says it has dram failed to start (S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail)

Attach a screenshot of this error message

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram