Hovatek Forum DEVELOPMENT Android [Please help] need TWRP and ROOT for my device
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] need TWRP and ROOT for my device

[Please help] need TWRP and ROOT for my device

lebah
lebah
lebah
Enthusiastic Member
7
13-05-2018, 04:18 PM
#1



hi all ... i need a TWRP and ROOT on my device i have used a lot of instructions in this forum.
8 hours but did not produce any results at all. my device is ADVAN iTAB 7 MT8735B 2GB RAM
and runs on android nougat 7.0. Thanks before



here
recovery file
drive.google.com/file/d/1wZo6jtSVRF5TrH7qH0vXPD09QWwD2IGE/view?usp=sharing

and
boot file
drive.google.com/file/d/19kFPOvCbD3NaRB97q6OYNEN5sRqWZXzC/view?usp=sharing
hovatek
hovatek
hovatek
Administrator
49,610
14-05-2018, 11:36 AM
#2
(13-05-2018, 04:18 PM)lebah hi all ... i need a TWRP and ROOT on my device i have used a lot of instructions in this forum.
8 hours but did not produce any results at all. my device is ADVAN iTAB 7 MT8735B 2GB RAM
and runs on android nougat 7.0. Thanks before



here
recovery file
drive.google.com/file/d/1wZo6jtSVRF5TrH7qH0vXPD09QWwD2IGE/view?usp=sharing

and
boot file
drive.google.com/file/d/19kFPOvCbD3NaRB97q6OYNEN5sRqWZXzC/view?usp=sharing

Have you tried using Magisk @ https://www.hovatek.com/forum/thread-21427.html ?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
lebah
lebah
lebah
Enthusiastic Member
7
14-05-2018, 02:37 PM
#3
yes i tried, like i say on my G1 its work,but on my tablet it doesnt..!please i just need access root to my device
hovatek
hovatek
hovatek
Administrator
49,610
14-05-2018, 07:46 PM
#4
(14-05-2018, 02:37 PM)lebah yes i tried, like i say on my G1 its work,but on my tablet it doesnt..!please i just need access root to my device

you'll need to explain "doesn't" in details
you couldn't flash or you could but ended with an error?
if there was an error, what's the error message?
lebah
lebah
lebah
Enthusiastic Member
7
15-05-2018, 03:55 PM
#5



I always get this error

"Red State
your devices has failed verification and not work properly
your device will boot in 5 seconds"

nb=sorry I did not add photos, it is difficult to enter link address here
hovatek
hovatek
hovatek
Administrator
49,610
15-05-2018, 06:53 PM
#6
(15-05-2018, 03:55 PM)lebah I always get this error

"Red State
your devices has failed verification and not work properly
your device will boot in 5 seconds"

nb=sorry I did not add photos, it is difficult to enter link address here

remove the https:// from the link then post
also how did you flash the patched_boot?  [using fastboot ie unlocking bootloader first OR using SPft]
lebah
lebah
lebah
Enthusiastic Member
7
16-05-2018, 10:43 AM
#7
(15-05-2018, 06:53 PM)X3non
(15-05-2018, 03:55 PM)lebah I always get this error

"Red State
your devices has failed verification and not work properly
your device will boot in 5 seconds"

nb=sorry I did not add photos, it is difficult to enter link address here

remove the https:// from the link then post
also how did you flash the patched_boot?  [using fastboot ie unlocking bootloader first OR using SPft]

I use SPFlashToolv5.1804 and fastboot via adb for flashing custom recovery, and I tried SuperrKitchen on ubuntu to make TWRP porting and the result is the same after reboot and always go into  recovery default factory then the error is always there.I've tried to install supersu.zip via factory default recovery, and the error that appears is the signature verification failed, does boot.img have to patch first?
This post was last modified: 16-05-2018, 10:50 AM by lebah.
hovatek
hovatek
hovatek
Administrator
49,610
16-05-2018, 12:10 PM
#8
(16-05-2018, 10:43 AM)lebah I use SPFlashToolv5.1804 and fastboot via adb for flashing custom recovery, and I tried SuperrKitchen on ubuntu to make TWRP porting and the result is the same after reboot and always go into  recovery default factory then the error is always there.I've tried to install supersu.zip via factory default recovery, and the error that appears is the signature verification failed, does boot.img have to patch first?

You can't flash supersu in stock recovery. has to be a custom recovery.
The Magisk method does not require a custom recovery. Did you follow that guide?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
lebah
lebah
lebah
Enthusiastic Member
7
16-05-2018, 02:22 PM
#9
(16-05-2018, 12:10 PM)hovatek
(16-05-2018, 10:43 AM)lebah I use SPFlashToolv5.1804 and fastboot via adb for flashing custom recovery, and I tried SuperrKitchen on ubuntu to make TWRP porting and the result is the same after reboot and always go into  recovery default factory then the error is always there.I've tried to install supersu.zip via factory default recovery, and the error that appears is the signature verification failed, does boot.img have to patch first?

You can't flash supersu in stock recovery. has to be a custom recovery.
The Magisk method does not require a custom recovery. Did you follow that guide?

yes..i did
hovatek
hovatek
hovatek
Administrator
49,610
17-05-2018, 11:14 AM
#10
(16-05-2018, 02:22 PM)lebah yes..i did

Is your bootloader unlocked? If not unlock and let me know if the device can boot up normally after.
BTW, hope you have the firmware for your device
Try Philz @ https://www.hovatek.com/forum/thread-21495.html
This post was last modified: 17-05-2018, 11:48 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram