[Manuel Smalls]

While trying to unlock my mtn e5573-322 mifi, It got bricked and I have searched all over the internet for a way to fix, but haven't succeeded yet….. the two green leds keeps blinking

[Manuel Smalls]

All admins should help me out…. I mistakenly flash the webUI first(it stopped half way) and when I try the dashboard firmware, it gives error 13 while show my custom version, firmware version bla bla bla as if there is a mismatch

[X3non]

While trying to unlock my mtn e5573-322 mifi,  It got bricked and I have searched all over the internet for a way to fix, but haven't succeeded yet….. the two green leds keeps blinking

i take it you were able to successfully flash usbloader
start from step 12 @ https://www.hovatek.com/forum/thread-16772.html
indicate which firmware and web-ui you were able to flash successfully and the one[s] you weren't able to flash successfully

[Manuel Smalls]

I was able to flash the one of bolonger…
While the web-ui only stopped at half way

[X3non]

I was able to flash the one of bolonger…
While the web-ui only stopped at half way

you gave answer for only the web-ui
what about the two firmwares? ; indicate for both of them which one you were able to flash and not flash sucessfully

[Manuel Smalls]

I wasnt able to flash e5573cs_update_21.318.03.00.00.exe and e5573cs_update_21.318.99.03.00.exe…….. They both gave error code 13, update failed (then my current firmware version 21.327.62.00.200, current web ui version: web-ui_17.100.18.01.200_mre5, then current dashboard version : web-ui_17.100.18.01.200_mre5 were all shown in a tabular form below the error message)

Then I flashed the update_four_17.100.15.01.356_mre5.exe, after getting half way ,it gave same error msg as above….

Only e5573_update_webui_17.109.00.03.mod1.4.exe got half way and gave error code 19, download failed…

And two green led keeps blinking endlessly

[X3non]

I wasnt able to flash e5573cs_update_21.318.03.00.00.exe and e5573cs_update_21.318.99.03.00.exe
...
And two green led keeps blinking endlessly

it seems yours is having latest firmware and webui version
bootshot the device and reflash usbloader
dont flash E5573cs_Update_21.318.99.03.00
flash the web-ui in the link under notes / tips @ https://www.hovatek.com/forum/thread-16772.html
flash E5573cs_Update_21.318.03.00.00
let me know the outcome

[Manuel Smalls]

Thanks boss, I will get back to you

[Manuel Smalls]

The Web ui in the link are of two format, the exe and the bin, I was unable to use the bin and exe downloaded to about half and gave error code 19, download failed……….. Whats the next thing to do boss????

Can the web-ui. 17.100.bin…… be flash using the balong loader…..

Thanks for the reply

[Manuel Smalls]

Still awaiting ur response