[Tutorial] How to setup an Infinity-Box CM2 Dongle
[Tutorial] How to setup an Infinity-Box CM2 Dongle
20-01-2018, 12:51 PM
In order to run Chinese Miracle II (CM2) software like CM2MTK, CM2SPD, CM2QLM etc, you'll need an Infinity CM2 dongle. If you're looking to buy an Infinity CM2 dongle then Order Now .
![[Image: Infinity-box-CM2-Dongle.webp]](https://www.hovatek.com/blog/bpyeki/uploads/2023/11/Infinity-box-CM2-Dongle.webp)
Requirements
- Internet connection
- PC
- Infinity CM2 dongle
- Install Alcor Smartcard drivers @ https://download.lenovo.com/pccbbs/mobiles/n10v105w.exe
How to setup and activate Infinity-box dongle
- Connect the dongle to your PC via the USB port
- Download and install Infinity Dongle Manager (Smart-card Manager) at https://www.infinity-box.com/support/?s=3
- Extract the contents of the zip, open the Dongle Manager folder and run DongleManager.exe
- When the Infinity Dongle Manager dashboard opens, click on the Update Firmware tab
- Click the Update button
- The update process will be interrupted by a prompt asking you to register (click Yes to register if you're not)
- Fill in the name and email fields then click Register
- The firmware update process should resume and update the smart card firmware version to the latest
Getting your Infinity Online Service (IOS) username and password
- After the firmware update is complete, click on the Serial Number S/N tab
- Select Read Online Service Username / Password from the dropdown the click Process
- Your IOS username and password will appear
- Head over to the Infinity Online Service (IOS) portal at https://user.infinity-box.com/ to login
Downloading and installing CM2 Modules
- After setting up the dongle, download the module[s] you wish to install @ http://dl1.infinity-box.com/00/index-1.p...=software/
- Extract the compressed file
- Launch the exe and follow the prompts to complete installation
Important Notice
Its good practice to close all open modules and eject the dongle (from system tray) before disconnecting from the PC
This post was last modified: 30-05-2026, 06:27 PM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
21-01-2018, 12:40 AM
(20-01-2018, 12:51 PM)hovatek ..Thank you very much please i want to purchase this dongle am at nigeria pls can you help.. And what's the cost.
This post was last modified: 21-01-2018, 09:22 AM by hovatek.
10-06-2018, 01:52 PM
(10-06-2018, 11:33 AM)5diamond Please I need where to buy this tool in ikeja and how much
place your order @ https://www.hovatek.com/order.php?brand=...el=dongles
08-09-2018, 03:16 PM
(08-09-2018, 07:32 AM)5diamond I need help on how to remove frp on Wiko Pulp Fab 4G with CM2 dongle
See https://www.hovatek.com/forum/thread-22217.html
27-09-2018, 01:52 AM
This post was last modified: 27-09-2018, 07:07 AM by hovatek.
02-07-2019, 04:41 PM
Written
Error : Failed to open port
02-07-2019, 09:15 PM
(02-07-2019, 04:41 PM)luckypaulo I bought cm2, after installing all required drive and setting cm2mt2 is not working.
Written
Error : Failed to open port
Do you get this error when launching the module?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
