Join us on Tl   Wh

Hovatek Forum DEVELOPMENT Android [Please help] Custom recovery for Innjoo Halo 3

[Please help] Custom recovery for Innjoo Halo 3

[Please help] Custom recovery for Innjoo Halo 3

Pages (3): 1 2 3 Next
ThePunisher
ThePunisher
ThePunisher
Enthusiastic Member
14
16-11-2017, 01:20 AM
#1



Hello, I have just gotten an Innjoo Halo 3. I would like to know if there's a custom recovery for it, so I can flash Magisk, Xposed and ARISE.

My device's information is as follows:

- ROM: Stock (Halo3-7.0-InnJoo-20170426-V1_164505) (latest)
- Android version: 7.0
- Baseband version: MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P32, 2017/04/26
- Kernel version: 3.18.35+ release@release12 #1 Wed Apr 26 17:51:47 CST 2017
- Build number: Halo3-7.0-InnJoo-20170426-V1
- Hardware version V2-P3

Everything is stock and the bootloader is unlocked.


Thank you for reading!
hovatek
hovatek
hovatek
Administrator
49,761
16-11-2017, 12:26 PM
#2
(16-11-2017, 01:20 AM)ThePunisher Hello, I have just gotten an Innjoo Halo 3. I would like to know if there's a custom recovery for it, so I can flash Magisk, Xposed and ARISE.

My device's information is as follows:

- ROM: Stock (Halo3-7.0-InnJoo-20170426-V1_164505) (latest)
- Android version: 7.0
- Baseband version: MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P32, 2017/04/26
- Kernel version: 3.18.35+ release@release12 #1 Wed Apr 26 17:51:47 CST 2017
- Build number: Halo3-7.0-InnJoo-20170426-V1
- Hardware version V2-P3

Everything is stock and the bootloader is unlocked.


Thank you for reading!

That's MT6737
Do you have the firmware?
This post was last modified: 16-11-2017, 12:30 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
ThePunisher
ThePunisher
ThePunisher
Enthusiastic Member
14
16-11-2017, 05:36 PM
#3
(16-11-2017, 12:26 PM)hovatek
(16-11-2017, 01:20 AM)ThePunisher Hello, I have just gotten an Innjoo Halo 3. I would like to know if there's a custom recovery for it, so I can flash Magisk, Xposed and ARISE.

My device's information is as follows:

- ROM: Stock (Halo3-7.0-InnJoo-20170426-V1_164505) (latest)
- Android version: 7.0
- Baseband version: MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P32, 2017/04/26
- Kernel version: 3.18.35+ release@release12 #1 Wed Apr 26 17:51:47 CST 2017
- Build number: Halo3-7.0-InnJoo-20170426-V1
- Hardware version V2-P3

Everything is stock and the bootloader is unlocked.


Thank you for reading!

That's MT6737
Do you have the firmware?
I'm afraid not. I can't find it at InnJoo's website either, my model doesn't show up in the download page.

However, I do have ADB and fastboot. I should be able to pull whatever's needed, if you send me some guidance.

Thank you for your reply.
hovatek
hovatek
hovatek
Administrator
49,761
16-11-2017, 06:52 PM
#4
(16-11-2017, 05:36 PM)ThePunisher I'm afraid not. I can't find it at InnJoo's website either, my model doesn't show up in the download page.

However, I do have ADB and fastboot. I should be able to pull whatever's needed, if you send me some guidance.

Thank you for your reply.

you wont be able to pull anything out using adb without root
you can try requesting for the stock rom directly from innjoo and hopefully they'll provide you a link
also you can also try dumping the firmware of your device using the guide @ https://www.hovatek.com/forum/thread-13347.html
lets know if you are successful
ThePunisher
ThePunisher
ThePunisher
Enthusiastic Member
14
17-11-2017, 01:30 AM
#5



[quote pid='124056' dateline='1510854722']
I have e-mailed InnJoo and am awaiting their reply.

I tried to dump the firmware myself by following the guide you sent, but unfortunately Miracle Box isn't working for me. 

I opened the loader, ticked "Read", selected "8th Boot(MT65xx & MT67xx/8127), ticked "Save as scatter file" and hit "Start Button". Turned the phone off and connected the USB cable. As soon as I plug it in Miracle Box connects to the phone, but when it hits ">>Downloading Boot8 . . ." the program crashes (Windows dialog: "miracle-box has stopped working") and the phone boots as normal.

Miracle Box log:

Code:

Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________
Miracle Box Ver Info
Miracle Box 2.61
Miracle Huawei Tool 1.6 (New)
Miracle Moto MTK Tool 1.4
Miracle ViVo Tool 1.3b
______________________________
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM16)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00



(I used Windows Vista to do this.)

Thank you for your support so far, I really appreciate it!
[/quote]
ThePunisher
ThePunisher
ThePunisher
Enthusiastic Member
14
17-11-2017, 01:32 AM
#6
(16-11-2017, 06:52 PM)X3non
(16-11-2017, 05:36 PM)ThePunisher I'm afraid not. I can't find it at InnJoo's website either, my model doesn't show up in the download page.

However, I do have ADB and fastboot. I should be able to pull whatever's needed, if you send me some guidance.

Thank you for your reply.

you wont be able to pull anything out using adb without root
you can try requesting for the stock rom directly from innjoo and hopefully they'll provide you a link
also you can also try dumping the firmware of your device using the guide @ *******
lets know if you are successful

I have e-mailed InnJoo and am awaiting their reply.

I tried to dump the firmware myself by following the guide you sent, but unfortunately Miracle Box isn't working for me. 

I opened the loader, ticked "Read", selected "8th Boot(MT65xx & MT67xx/8127), ticked "Save as scatter file" and hit "Start Button". Turned the phone off and connected the USB cable. As soon as I plug it in Miracle Box connects to the phone, but when it hits ">>Downloading Boot8 . . ." the program crashes (Windows dialog: "miracle-box has stopped working") and the phone boots as normal.

Miracle Box log:

Code:

Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________
Miracle Box Ver Info
Miracle Box 2.61
Miracle Huawei Tool 1.6 (New)
Miracle Moto MTK Tool 1.4
Miracle ViVo Tool 1.3b
______________________________
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM16)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00



(I used Windows Vista to do this.)

Thank you for your support so far, I really appreciate it!
hovatek
hovatek
hovatek
Administrator
49,761
17-11-2017, 11:31 AM
#7
(17-11-2017, 01:32 AM)ThePunisher I have e-mailed InnJoo and am awaiting their reply.

I tried to dump the firmware myself by following the guide you sent, but unfortunately Miracle Box isn't working for me. 

I opened the loader, ticked "Read", selected "8th Boot(MT65xx & MT67xx/8127), ticked "Save as scatter file" and hit "Start Button". Turned the phone off and connected the USB cable. As soon as I plug it in Miracle Box connects to the phone, but when it hits ">>Downloading Boot8 . . ." the program crashes (Windows dialog: "miracle-box has stopped working") and the phone boots as normal.

Miracle Box log:

Code:

Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________
Miracle Box Ver Info
Miracle Box 2.61
Miracle Huawei Tool 1.6 (New)
Miracle Moto MTK Tool 1.4
Miracle ViVo Tool 1.3b
______________________________
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM16)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00



(I used Windows Vista to do this.)

Thank you for your support so far, I really appreciate it!

Try using Windows 7 or above instead

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
ThePunisher
ThePunisher
ThePunisher
Enthusiastic Member
14
19-11-2017, 07:29 PM
#8
(17-11-2017, 11:31 AM)hovatek
(17-11-2017, 01:32 AM)ThePunisher I have e-mailed InnJoo and am awaiting their reply.

I tried to dump the firmware myself by following the guide you sent, but unfortunately Miracle Box isn't working for me. 

I opened the loader, ticked "Read", selected "8th Boot(MT65xx & MT67xx/8127), ticked "Save as scatter file" and hit "Start Button". Turned the phone off and connected the USB cable. As soon as I plug it in Miracle Box connects to the phone, but when it hits ">>Downloading Boot8 . . ." the program crashes (Windows dialog: "miracle-box has stopped working") and the phone boots as normal.

Miracle Box log:

Code:

Fuzzy Logic Method is very safe and reliable !
Check Authentication...
Check the new version.
______________________________
Miracle Box Ver Info
Miracle Box 2.61
Miracle Huawei Tool 1.6 (New)
Miracle Moto MTK Tool 1.4
Miracle ViVo Tool 1.3b
______________________________
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM16)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00



(I used Windows Vista to do this.)

Thank you for your support so far, I really appreciate it!

Try using Windows 7 or above instead

I have upgraded to Windows 10 64-bit. Still getting the same behaviour from Miracle Box. "Downloading Boot8..." and immediate crash "miracle-box has stopped working".

Sad FML
hovatek
hovatek
hovatek
Administrator
49,761
20-11-2017, 10:47 AM
#9
(19-11-2017, 07:29 PM)ThePunisher I have upgraded to Windows 10 64-bit. Still getting the same behaviour from Miracle Box. "Downloading Boot8..." and immediate crash "miracle-box has stopped working".

Sad FML

Are you certain you downloaded the loader version?
BTW, try using a different PC
This post was last modified: 20-11-2017, 10:47 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
ThePunisher
ThePunisher
ThePunisher
Enthusiastic Member
14
20-11-2017, 11:42 PM
#10
(20-11-2017, 10:47 AM)hovatek
(19-11-2017, 07:29 PM)ThePunisher I have upgraded to Windows 10 64-bit. Still getting the same behaviour from Miracle Box. "Downloading Boot8..." and immediate crash "miracle-box has stopped working".

Sad FML

Are you certain you downloaded the loader version?
BTW, try using a different PC

Yes, I downloaded the right version.

Tried it on a x86 Windows 10, same thing.

But I tried to do this on a Wiko Pulp (MTK too). It works on the Wiko, no crash. So it's something to do with the InnJoo. Maybe because the battery is non-removable?

Do I need root to try the SPFlash method?

Also, I will try to use one of those chinese root methods, like KingoRoot. I've had success converting KingoRoot to SuperSu before. Maybe then I'll be able to pull the files myself, or use one of the root methods.

Thanks for not giving up!
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt