How to root the MTN L860
How to root the MTN L860
10-08-2017, 11:19 AM
![[Image: Hovatek-How-to-root-the-MTN-L860-1.jpg]](https://www.hovatek.com/blog/bpyeki/uploads/2017/08/Hovatek-How-to-root-the-MTN-L860-1.jpg)
The MTN L860 (e.g MTN-L860_2016-07-14 ) is an MT6735 powered phone running on Android 6 (Marshmallow)
How to root the MTN L860
- Dump your firmware in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
- Download SuperSU 2.78 @ https://www.androidfilehost.com/?fid=457084094631642692 and save to both phone storage and SD card
- Create a new folder named Hovatek on your PC
- Copy preloader.bin from your Miracle Box backup into the Hovatek folder
- Download Philz for MTN L860 ported by Team Hovatek @ https://drive.google.com/file/d/0B4S-Z72...1Iczg/view
- Copy the Philz recovery.bin and scatter file from the Philz zip file downloaded above into the Hovatek folder, making peloader.bin, scatter file and recovery.bin (Philz) in the folder
- Flash the preloader.bin and recovery.bin using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html
- Boot the phone into recovery mode (Vol up + Power) after flashing
- In Philz recovery, you use the Volume buttons to navigate and Power button to select
- Select Install Zip
- Navigate to the location of the SuperSU2.78.zip on the SD Card and select it
- Wait till flashing is complete
- If you are prompted to fix root, select No
- Reboot the phone normally
- Confirm Root by installing and running Root Checker @ https://play.google.com/store/apps/detai...heck&hl=en
This post was last modified: 10-08-2017, 11:20 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
08-09-2018, 03:04 PM
(08-09-2018, 07:09 AM)Raoul Tokouo Pouviez vous m aider a rooter la tablette 4G MTN
LE MAKU MTN 395 ?
Root your device using magisk @ https://www.hovatek.com/forum/thread-21427.html
If you still require further assistance then please visit https://www.hovatek.com/forum/thread-514.html to post a new thread.
07-12-2018, 07:51 PM
(07-12-2018, 03:15 PM)Ledingo Hello Sir, I still have a problem when flashing scatter, it says:" >>Error set: patti"
How would I do please?
Please create a new thread so we focus on it.
See https://www.hovatek.com/forum/thread-514.html for how to create a new thread.
Sent from my M5 mini using Hovatek Mobile
07-12-2018, 08:38 PM
(07-12-2018, 03:15 PM)Ledingo Hello Sir, I still have a problem when flashing scatter, it says:" >>Error set: patti"
How would I do please?
That's because you didn't include preloader from your backup when flashing
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)