Huawei G750-u10 completely dead after flash ???
Huawei G750-u10 completely dead after flash ???
(12-02-2017, 12:27 AM)basim G750_U10 completely dead after flash just vibrates when pressing power button or connecting cable>Always gives this error and keeps vibrating and hear USB sound like it's keeping connecting and disconnecting. Is there any way to revive this device?
(12-02-2017, 05:06 PM)hovatek(12-02-2017, 12:27 AM)basim G750_U10 completely dead after flash just vibrates when pressing power button or connecting cable>Always gives this error and keeps vibrating and hear USB sound like it's keeping connecting and disconnecting. Is there any way to revive this device?
Seems you might have to follow the fix outlined by @droidmobitech
Seems like a dead preloader.
Does the phone still get detected in device manager when you connect?
If yes, what does it get detected as.
(28-03-2017, 12:06 PM)barthodian(12-02-2017, 05:06 PM)hovatek(12-02-2017, 12:27 AM)basim G750_U10 completely dead after flash just vibrates when pressing power button or connecting cable>Always gives this error and keeps vibrating and hear USB sound like it's keeping connecting and disconnecting. Is there any way to revive this device?
Seems you might have to follow the fix outlined by @droidmobitech
Seems like a dead preloader.
Does the phone still get detected in device manager when you connect?
If yes, what does it get detected as.
It seems like the thread starter has left the building. Will it be acceptable if I revive the conversation?
If so, I will go on and answer your question @basim (assuming his/her issue is the same as mine): no detection at all. Looks like a hard brick.
@droidmobitech will you still help me out if I could provide the PCD photos?
(28-03-2017, 12:06 PM)barthodianYes, your device has the Mt6592 cpu,(12-02-2017, 05:06 PM)hovatek(12-02-2017, 12:27 AM)basim G750_U10 completely dead after flash just vibrates when pressing power button or connecting cable>Always gives this error and keeps vibrating and hear USB sound like it's keeping connecting and disconnecting. Is there any way to revive this device?
Seems you might have to follow the fix outlined by @droidmobitech
Seems like a dead preloader.
Does the phone still get detected in device manager when you connect?
If yes, what does it get detected as.
It seems like the thread starter has left the building. Will it be acceptable if I revive the conversation?
If so, I will go on and answer your question @basim (assuming his/her issue is the same as mine): no detection at all. Looks like a hard brick.
@droidmobitech will you still help me out if I could provide the PCD photos?
(28-03-2017, 12:06 PM)barthodianYes, your device has the Mt6592 cpu,(12-02-2017, 05:06 PM)hovatek(12-02-2017, 12:27 AM)basim G750_U10 completely dead after flash just vibrates when pressing power button or connecting cable>Always gives this error and keeps vibrating and hear USB sound like it's keeping connecting and disconnecting. Is there any way to revive this device?
Seems you might have to follow the fix outlined by @droidmobitech
Seems like a dead preloader.
Does the phone still get detected in device manager when you connect?
If yes, what does it get detected as.
It seems like the thread starter has left the building. Will it be acceptable if I revive the conversation?
If so, I will go on and answer your question @basim (assuming his/her issue is the same as mine): no detection at all. Looks like a hard brick.
@droidmobitech will you still help me out if I could provide the PCD photos?
(28-03-2017, 12:21 PM)droidmobitech(28-03-2017, 12:06 PM)barthodianYes, your device has the Mt6592 cpu,(12-02-2017, 05:06 PM)hovatek(12-02-2017, 12:27 AM)basim G750_U10 completely dead after flash just vibrates when pressing power button or connecting cable>Always gives this error and keeps vibrating and hear USB sound like it's keeping connecting and disconnecting. Is there any way to revive this device?
Seems you might have to follow the fix outlined by @droidmobitech
Seems like a dead preloader.
Does the phone still get detected in device manager when you connect?
If yes, what does it get detected as.
It seems like the thread starter has left the building. Will it be acceptable if I revive the conversation?
If so, I will go on and answer your question @basim (assuming his/her issue is the same as mine): no detection at all. Looks like a hard brick.
@droidmobitech will you still help me out if I could provide the PCD photos?
It will be appropriate if you could send pictures of the pcb for help
You may try and identify the test point, usually Colo are kcolo should be written on pcb , they are test points. ....
I assume you can go ahead, after disassemble. ..
If not, using a voltmeter, test all other unlabeled points with GND
The test point has no such volts on pcb
Short that point to gnd
Hopefullly, it should detect
If this does not work then an emmc replacement is the final solution
(28-03-2017, 12:21 PM)droidmobitech(28-03-2017, 12:06 PM)barthodianYes, your device has the Mt6592 cpu,(12-02-2017, 05:06 PM)hovatek(12-02-2017, 12:27 AM)basim G750_U10 completely dead after flash just vibrates when pressing power button or connecting cable>Always gives this error and keeps vibrating and hear USB sound like it's keeping connecting and disconnecting. Is there any way to revive this device?
Seems you might have to follow the fix outlined by @droidmobitech
Seems like a dead preloader.
Does the phone still get detected in device manager when you connect?
If yes, what does it get detected as.
It seems like the thread starter has left the building. Will it be acceptable if I revive the conversation?
If so, I will go on and answer your question @basim (assuming his/her issue is the same as mine): no detection at all. Looks like a hard brick.
@droidmobitech will you still help me out if I could provide the PCD photos?
It will be appropriate if you could send pictures of the pcb for help
You may try and identify the test point, usually Colo are kcolo should be written on pcb , they are test points. ....
I assume you can go ahead, after disassemble. ..
If not, using a voltmeter, test all other unlabeled points with GND
The test point has no such volts on pcb
Short that point to gnd
Hopefullly, it should detect
If this does not work then an emmc replacement is the final solution