Home Forum Blog Private Support Courses
Our courses are now on YouTube! Start Watching
Hovatek Forum HARDWARE Repairs [Tutorial] How to remove / take out the battery of an Infinix Zero X506

[Tutorial] How to remove / take out the battery of an Infinix Zero X506

[Tutorial] How to remove / take out the battery of an Infinix Zero X506

 View a Printable Version
 
hovatek
hovatek
hovatek
Administrator
Website Find
50,977
25-09-2015, 07:18 PM
#1



This is a step-by-step guide on how to remove the battery of an Infinix Zero X506 Android phone. The battery is inbuilt so you're going to have to disassemble the device.

Tools needed

  • Precision Screwdrivers / tools set
  • Razor blade
  • Adhesive / Gum when reassembling (Not Super glue or any permanent one)

Note:
  • Disassembling your phone automatically voids your warranty
  • The phone is divided into three major layers; Back cover, Body and Screen. The back cover is fastened to the body by an adhesive. Cutting through this adhesive dislodges the back cover.
  • Switch off the phone and take out the SIM + SIM plate before disassembling (important).

How to remove / take out the battery of an Infinix Zero X506 Android phone


Follow the steps below to remove the battery of the Infinix Zero X506 Android phone

  1.  Turn the phone upside down (screen facing downwards) and using a razor blade, cut down the length of the groove on the right-hand side of the back cover

    [Image: how-to-remove-infinix-zero-battery-1.jpg]

  2. Do the same thing for the left-hand side

    [Image: how-to-remove-infinix-zero-battery-2.jpg]

  3. Using a flat tipped prying tool, gently lift the back cover from one end

    [Image: how-to-remove-infinix-zero-battery-3.jpg]

  4. Lift off the back cover (remove any adhesive still holding it down)

    [Image: how-to-remove-infinix-zero-battery-4.jpg]

  5. The phone should look something like this

    [Image: how-to-remove-infinix-zero-battery-5.jpg]

  6. Using a tiny screwdriver, take out all screws (there should be about 9 holes)

    [Image: how-to-remove-infinix-zero-battery-6.jpg]

  7. At the bottom of the phone (the end opposite where you have the USB and headset ports), take our the clip holding the body to the screen

    [Image: how-to-remove-infinix-zero-battery-7.jpg]

  8. Turn the phone (screen facing up). Using a flat tipped prying tool, gently separate the screen from the body

    [Image: how-to-remove-infinix-zero-battery-8.jpg]

  9. Using your finger nail or a prying tool, dislodge the screen from the body on all four corners the phone

    [Image: how-to-remove-infinix-zero-battery-9.jpg]  

  10. Lift off the screen and you should have something like this

    [Image: how-to-remove-infinix-zero-battery-10.jpg]

  11. Just above the battery, you'll find two silver clips, if you find then uncliped, put them firmly in place

    [Image: how-to-remove-infinix-zero-battery-11.jpg]

  12. Gently lift the battery from the bottom

    [Image: how-to-remove-infinix-zero-battery-12.jpg]

  13. Raise the battery (about 90 degrees to the phone) then lift it gently to disconnect it

    [Image: how-to-remove-infinix-zero-battery-13.jpg]

  14. Done! You should have something like this

    [Image: how-to-remove-infinix-zero-battery-14.jpg]

  15. To reassemble, simply retrace your steps with the help of the pictures and don't forget to fasten the back cover using an adhesive
This post was last modified: 11-10-2019, 03:11 PM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Reply
Reply
 View a Printable Version
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
WhTlYt