prog_emmc_firehose vivo s1 pro

thedivinefury
Enthusiastic Member

10

26-06-2020, 01:31 AM

#1

I want to flash my vivo s1 pro. But after I downloaded the firmware, I did not find prog_emmc_firehose in the firmware that I downloaded. Because I will flash using QFIL. I only found similar files, prog_firehose_ddr.elf and prog_firehose_lite.elf. Please help me

thedivinefury
Enthusiastic Member

10

26-06-2020, 02:08 AM

#2

I want to flash my vivo s1 pro. But after I downloaded the firmware, I did not find prog_emmc_firehose in the firmware that I downloaded. Because I will flash using QFIL. I only found similar files, prog_firehose_ddr.elf and prog_firehose_lite.elf. Please help me

thedivinefury
Enthusiastic Member

10

26-06-2020, 03:52 AM

#3

In the firmware that I downloaded there are many files:

rawprogram1.xml
rawprogram2.xml
rawprogram3.xml
rawprogram4.xml
rawprogram5.xml
rawprogram_no_qcn1.xml
rawprogram_no_qcn2.xml
rawprogram_no_qcn3.xml
rawprogram_no_qcn4.xml
rawprogram_no_qcn5.xml
rawprogram_unsparse0.xml
rawprogram_unsparse0_PD1945F_EX_AE_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_BD_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_HK_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_ID_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_IN_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_KH_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_KZ_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_LK_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_MM_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_MY_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_N_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_NP_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_PH_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_PK_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_RU_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_SA_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_SG_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_AIS.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_DTAC.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_TRUE.xml
rawprogram_unsparse0_PD1945F_EX_TW_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_UA_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_UZ_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_VN_NULL_NULL.xml
rawprogram_unsparse_no_qcn0.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_AE_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_BD_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_HK_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_ID_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_IN_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_KH_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_KZ_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_LK_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_MM_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_MY_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_N_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_NP_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_PH_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_PK_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_RU_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_SA_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_SG_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_AIS.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_DTAC.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_TRUE.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TW_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_UA_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_UZ_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_VN_NULL_NULL.xml

I want to flash using QFIL, but I did not find rawprogram0.xml. What is the solution, is it replaced with one of the rawprogram file in my folder firmware? Please help me

hovatek
Administrator

51,024

26-06-2020, 10:58 AM

#4

(26-06-2020, 01:31 AM)thedivinefury I want to flash my vivo s1 pro. But after I downloaded the firmware, I did not find prog_emmc_firehose in the firmware that I downloaded. Because I will flash using QFIL. I only found similar files, prog_firehose_ddr.elf and prog_firehose_lite.elf. Please help me

use the programmer file you find within the firmware. file name / extension doesn't matter

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

thedivinefury
Enthusiastic Member

10

26-06-2020, 11:40 AM

#5

(26-06-2020, 10:58 AM)X3non
(26-06-2020, 01:31 AM)thedivinefury I want to flash my vivo s1 pro. But after I downloaded the firmware, I did not find prog_emmc_firehose in the firmware that I downloaded. Because I will flash using QFIL. I only found similar files, prog_firehose_ddr.elf and prog_firehose_lite.elf. Please help me

use the programmer file you find within the firmware. file name / extension doesn't matter

In the firmware that I downloaded there are many files:

rawprogram1.xml
rawprogram2.xml
rawprogram3.xml
rawprogram4.xml
rawprogram5.xml
rawprogram_no_qcn1.xml
rawprogram_no_qcn2.xml
rawprogram_no_qcn3.xml
rawprogram_no_qcn4.xml
rawprogram_no_qcn5.xml
rawprogram_unsparse0.xml
rawprogram_unsparse0_PD1945F_EX_AE_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_BD_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_HK_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_ID_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_IN_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_KH_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_KZ_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_LK_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_MM_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_MY_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_N_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_NP_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_PH_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_PK_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_RU_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_SA_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_SG_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_AIS.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_DTAC.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_TH_NULL_TRUE.xml
rawprogram_unsparse0_PD1945F_EX_TW_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_UA_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_UZ_NULL_NULL.xml
rawprogram_unsparse0_PD1945F_EX_VN_NULL_NULL.xml
rawprogram_unsparse_no_qcn0.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_AE_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_BD_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_HK_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_ID_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_IN_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_KH_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_KZ_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_LK_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_MM_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_MY_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_N_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_NP_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_PH_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_PK_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_RU_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_SA_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_SG_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_AIS.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_DTAC.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TH_NULL_TRUE.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_TW_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_UA_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_UZ_NULL_NULL.xml
rawprogram_unsparse_no_qcn0_PD1945F_EX_VN_NULL_NULL.xml

I want to flash using QFIL, but I did not find rawprogram0.xml. What is the solution, is it replaced with one of the rawprogram file in my folder firmware? Please help me

hovatek
Administrator

51,024

26-06-2020, 12:07 PM

#6

(26-06-2020, 03:52 AM)thedivinefury In the firmware that I downloaded there are many files:
...

compare the contents of rawprogram1-5, if it's all the same then use any one of them

This post was last modified: 26-06-2020, 12:08 PM by X3non.

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

thedivinefury
Enthusiastic Member

10

26-06-2020, 12:41 PM

#7

(26-06-2020, 12:07 PM)X3non
(26-06-2020, 03:52 AM)thedivinefury In the firmware that I downloaded there are many files:
...

compare the contents of rawprogram1-5, if it's all the same then use any one of them

Thank you for replying rawprogram1-5 is different. I want to ask, what's the difference between unsparse_no_qcn and unsparse only?
I have sent the file

This post was last modified: 26-06-2020, 12:47 PM by thedivinefury.

Attached Files

rawprogram.zip
Size: 3.81 KB / Downloads: 134

hovatek
Administrator

51,024

27-06-2020, 09:16 AM

#8

(26-06-2020, 12:41 PM)thedivinefury Thank you for replying rawprogram1-5 is different...
I have sent the file

select and use rawprogram1

(26-06-2020, 12:41 PM)thedivinefury I want to ask, what's the difference between unsparse_no_qcn and unsparse only?
I have sent the file

according to the contents
unsparse_no_qcn doesn't include persist partition when flashing the files within the firmware
unsparse_only includes persists partition when flashing

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

thedivinefury
Enthusiastic Member

10

27-06-2020, 09:37 AM

#9

(27-06-2020, 09:16 AM)X3non
(26-06-2020, 12:41 PM)thedivinefury Thank you for replying rawprogram1-5 is different...
I have sent the file

select and use rawprogram1

(26-06-2020, 12:41 PM)thedivinefury I want to ask, what's the difference between unsparse_no_qcn and unsparse only?
I have sent the file

according to the contents
unsparse_no_qcn doesn't include persist partition when flashing the files within the firmware
unsparse_only includes persists partition when flashing

The contents of rawprogram1-5 are only a few commands, while in rawprogram_unsparse it contains the combined commands from rawprogram1-5. Do I still choose rawprogram1? I have sent the rawprogram 1-5 files

Attached Files

Rawprogram 1-5.zip
Size: 3.77 KB / Downloads: 199

thedivinefury
Enthusiastic Member

10

30-06-2020, 10:51 AM

#10

(27-06-2020, 09:37 AM)thedivinefury
(27-06-2020, 09:16 AM)X3non
(26-06-2020, 12:41 PM)thedivinefury Thank you for replying rawprogram1-5 is different...
I have sent the file

select and use rawprogram1

(26-06-2020, 12:41 PM)thedivinefury I want to ask, what's the difference between unsparse_no_qcn and unsparse only?
I have sent the file

according to the contents
unsparse_no_qcn doesn't include persist partition when flashing the files within the firmware
unsparse_only includes persists partition when flashing
The contents of rawprogram1-5 are only a few commands, while in rawprogram_unsparse it contains the combined commands from rawprogram1-5. Do I still choose rawprogram1? I have sent the rawprogram 1-5 files

Please reply my question

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions

Important Notice