TECNO S3 displaying upside down
TECNO S3 displaying upside down
19-02-2018, 03:47 AM
I JUST EDITED THE BUILD.PROP
Code:
ro.sf.hwrotation=180then adb push build.prop system
but the phone state still upside down
also default was ro.sf.hwrotation=0
so why that while explanation was said by default should be 180 then change to 0Â
anyway i changed to 180 also to 0 but still got upside
also i flashed new rom still upside down
any help/suggestions
19-02-2018, 02:01 PM
(19-02-2018, 03:47 AM)lymo I JUST EDITED THE BUILD.PROP
 by adb pull system/build.propCode:ro.sf.hwrotation=180
then adb push build.prop system
but the phone state still upside down
also default was ro.sf.hwrotation=0
so why that while explanation was said by default should be 180 then change to 0Â
anyway i changed to 180 also to 0 but still got upside
also i flashed new rom still upside down
any help/suggestions
Whats caused the phone to display upside down in the first place?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
20-02-2018, 12:08 AM
(19-02-2018, 02:01 PM)hovatek(19-02-2018, 03:47 AM)lymo I JUST EDITED THE BUILD.PROP
 by adb pull system/build.propCode:ro.sf.hwrotation=180
then adb push build.prop system
but the phone state still upside down
also default was ro.sf.hwrotation=0
so why that while explanation was said by default should be 180 then change to 0Â
anyway i changed to 180 also to 0 but still got upside
also i flashed new rom still upside down
any help/suggestions
Whats caused the phone to display upside down in the first place?
actually aint my phone ,,someone gave mr to repair so i dont have alot info about it
20-02-2018, 09:57 AM
(20-02-2018, 12:08 AM)lymo actually aint my phone ,,someone gave mr to repair so i dont have alot info about it
This happens when a slightly incompatible firmware is flashed. Tecno S3 has multiple variants and also works with the M3 firmware so any of these might be responsible.
Take note of the current Build Number > backup the firmware then try flashing a Tecno S3 firmware at https://www.hovatek.com/forum/thread-19470.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
20-02-2018, 04:56 PM
(20-02-2018, 09:57 AM)hovatek(20-02-2018, 12:08 AM)lymo actually aint my phone ,,someone gave mr to repair so i dont have alot info about it
This happens when a slightly incompatible firmware is flashed. Tecno S3 has multiple variants and also works with the M3 firmware so any of these might be responsible.
Take note of the current Build Number > backup the firmware then try flashing a Tecno S3 firmware at https://www.hovatek.com/forum/thread-19470.html
i doubt that because on the rear of the phone its M3 well im going to flash m3 variant soon
21-02-2018, 10:41 AM
(20-02-2018, 04:56 PM)lymo i doubt that because on the rear of the phone its M3 well im going to flash m3 variant soon
Your title said S3... which is it?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
23-02-2018, 10:52 AM
(21-02-2018, 10:41 AM)hovatek(20-02-2018, 04:56 PM)lymo i doubt that because on the rear of the phone its M3 well im going to flash m3 variant soon
Your title said S3... which is it?
The Phone firmware is S3 but on the rear is m3
Anyway now i can no longer flash this Phone
I get error
S_DA_SDMMC_WRITE_FAILED (3153!)
I ALREADY TRIED ALL FIX LIST ON OTHER THREAD NO SOLUTION
23-02-2018, 05:10 PM
(23-02-2018, 10:52 AM)lymo ...
I get error
S_DA_SDMMC_WRITE_FAILED (3153!)
I ALREADY TRIED ALL FIX LIST ON OTHER THREAD NO SOLUTION
lets see a full screenshot of SPft along with the error message
BTW did you take note of the S3 build number that was previously running on the phone?
and which exact ROM are you trying to flash that gives this SPft error?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
25-02-2018, 12:37 AM
(23-02-2018, 05:10 PM)X3non(23-02-2018, 10:52 AM)lymo ...
I get error
S_DA_SDMMC_WRITE_FAILED (3153!)
I ALREADY TRIED ALL FIX LIST ON OTHER THREAD NO SOLUTION
lets see a full screenshot of SPft along with the error message
BTW did you take note of the S3 build number that was previously running on the phone?
and which exact ROM are you trying to flash that gives this SPft error?
The firmware was the same as firmware i downloaded here
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)