Bricked lumia 520
Bricked lumia 520
01-02-2016, 05:40 PM
Was updating to Windows 8 and the phone got too slow after factory reset the phone can't boot past logo. Any solution without flashing box?
Sent from my Infinix X510 using Hovatek mobile
01-02-2016, 10:09 PM
(01-02-2016, 05:40 PM)Samwanjeri Was updating to Windows 8 and the phone got too slow after factory reset the phone can't boot past logo. Any solution without flashing box?
Sent from my Infinix X510 using Hovatek mobile
Did you factory reset under Settings or using button combo?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
02-02-2016, 11:56 AM
(02-02-2016, 09:38 AM)Samwanjeri Neither is working
Sent from my Infinix X510 using Hovatek mobile
You'll need to flash then.
Try http://digipassion.com/flash-update-rese...very-tool/
Or
http://wmpoweruser.com/use-nokia-softwar...ne-device/
This post was last modified: 02-02-2016, 11:57 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
03-02-2016, 08:07 AM
Thanks the phone is back but the work wasn't a piece of cake
Sent from my Infinix X510 using Hovatek mobile
03-02-2016, 12:40 PM
(03-02-2016, 08:07 AM)Samwanjeri Thanks the phone is back but the work wasn't a piece of cake
Sent from my Infinix X510 using Hovatek mobile
What was the procedure you followed?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
03-02-2016, 02:26 PM
I. Run the windows recovery tool while the pc is under Internet connection since the tool require to download some files so as to get installed.
2. Ensure the bricked phone's battery is roughly half way charged or more. You need to charge using a working phone or a universal battery charger since the bricked phone can damage the battery.
3. Connect the bricked phone to the pc using the data cable.
3. If the phone does not automatically get detected click on my device was not detected and select lumia on the device manufacturer page
4. Press power on and volume + or- then release once the phone vibrates.
5. upon successful connection the pc will such for available package for your phone and might take time to download eg for 520 was around 1.52gb
6. After downloading youll now move on to flashing the downloaded package. Noticed it's not possible on some ports you can try to connect the phone via different ports on the pc once the package gets downloaded.
7. During flashing the phone must be over 25‰ of charge as well as the pc if it's a laptop. Do not interrupt the process. Thanks.
Sent from my Infinix X510 using Hovatek mobile
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)