[Please help] Infinix Hot 3 (x554 16+1 A2) refuse to accept flash.
[Please help] Infinix Hot 3 (x554 16+1 A2) refuse to accept flash.
05-07-2019, 11:04 AM
(04-07-2019, 06:30 PM)mrlone1997 ...
Note: i tried to use volume up + cable but nothing important. the phone tries to boot but stucks as usual.
format the phone using format all except bootloader in sp flash tool (format tab) and if successful then check if the phone is able to power on or not
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
05-07-2019, 08:23 PM
(05-07-2019, 11:04 AM)X3nonI have already tried that and all other options (risk and risk free option) under that 'format tab'. In fact it's one of the solutions i tried at the early stage of the problem.(04-07-2019, 06:30 PM)mrlone1997 ...
Note: i tried to use volume up + cable but nothing important. the phone tries to boot but stucks as usual.
format the phone using format all except bootloader in sp flash tool (format tab) and if successful then check if the phone is able to power on or not
I even tried it on Linux OS but nothing could get the phone to accept flash.
NOTE: other phones successfully flashed under the same SP Flash setup.
06-07-2019, 09:45 AM
(05-07-2019, 08:23 PM)mrlone1997 I have already tried that and all other options (risk and risk free option) under that 'format tab'. In fact it's one of the solutions i tried at the early stage of the problem.
I even tried it on Linux OS but nothing could get the phone to accept flash.
NOTE: other phones successfully flashed under the same SP Flash setup.
and without flashing the firmware, if format is successful then check if the phone is able to power on or not
whats the outcome of this?
This post was last modified: 06-07-2019, 09:46 AM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
06-07-2019, 01:17 PM
(06-07-2019, 09:45 AM)X3nonYes i tried that but it couldn't get it complete the format process. it get stuck as usual and eventually gives an error.(05-07-2019, 08:23 PM)mrlone1997 I have already tried that and all other options (risk and risk free option) under that 'format tab'. In fact it's one of the solutions i tried at the early stage of the problem.
I even tried it on Linux OS but nothing could get the phone to accept flash.
NOTE: other phones successfully flashed under the same SP Flash setup.
and without flashing the firmware, if format is successful then check if the phone is able to power on or not
whats the outcome of this?
See this attachment below for how exactly it does when i try to format. After fail, i on the phone nothing, the problem still exist.
Attached Files
06-07-2019, 06:24 PM
(06-07-2019, 01:17 PM)mrlone1997 See this attachment below for how exactly it does when i try to format. After fail, i on the phone nothing, the problem still exist.
your screenshot shows you're not in the format tab in sp flash tool
format tab >> auto format flash >> format whole flash except bootloader >> start
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
11-07-2019, 07:33 PM
i have try the phone under the format tab as requested in the screenshot below.
This post was last modified: 11-07-2019, 07:36 PM by mrlone1997.
Attached Files
12-07-2019, 10:44 AM
(11-07-2019, 07:33 PM)mrlone1997 Hi sorry for late reply.
i have try the phone under the format tab as requested in the screenshot below.
seems like the emmc chip is either faulty or loose, have this checked by a phone hardware repair technician and replace if necessary
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
12-07-2019, 05:10 PM
(12-07-2019, 10:44 AM)X3nonHey check this one out. That my friend sent a new finding to me that he tested on the phone.(11-07-2019, 07:33 PM)mrlone1997 Hi sorry for late reply.
i have try the phone under the format tab as requested in the screenshot below.
seems like the emmc chip is either faulty or loose, have this checked by a phone hardware repair technician and replace if necessary
He said somehow he was able to read the "phone info" with his box and even "read nvram" of the phone.
Nothing else worked with the phone on the box options beside these two option.
I don't know that became possible.
See bellow in the attachments.
It seems like i can't upload the nvram file. I will post with the link to that file
Attached Files
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)
