Hovatek Forum MOBILE Android no response from calibration from infinix x551
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


no response from calibration from infinix x551

no response from calibration from infinix x551

Dadjosm
Dadjosm
Dadjosm
Newbie
4
20-02-2018, 01:43 PM
#1



Hey guess and gurus, help me with an infinix phone that decided not to work again after charging it overnight, I have flashed it, changed the calibration with new working one from market, still not working.

Help a friend please, thanks for the help in advance
X3non
X3non
X3non
Recognized Contributor
22,062
20-02-2018, 05:00 PM
#2
(20-02-2018, 01:43 PM)Dadjosm Hey guess and gurus, help me with an infinix phone that decided not to work again after charging it overnight, I have flashed it, changed the calibration with new working one from market, still not working.

Help a friend please, thanks for the help in advance

what is the current state of the phone now? [totally dead, stuck at boot, etc]
what was wrong with the phone before you flashed and how did the problem begin?
Dadjosm
Dadjosm
Dadjosm
Newbie
4
20-02-2018, 10:49 PM
#3
(20-02-2018, 05:00 PM)X3non
(20-02-2018, 01:43 PM)Dadjosm Hey guess and gurus, help me with an infinix phone that decided not to work again after charging it overnight, I have flashed it, changed the calibration with new working one from market, still not working.

Help a friend please, thanks for the help in advance

what is the current state of the phone now? [totally dead, stuck at boot, etc]
what was wrong with the phone before you flashed and how did the problem begin?


The phone doesn't have any other problem apart from the touch pad and it boots normally.

It started after overcharging it over the night then the calibration doesn't respond in every area
This post was last modified: 20-02-2018, 10:50 PM by Dadjosm.
xerxes
xerxes
xerxes
Senior Member
8,355
20-02-2018, 11:45 PM
#4
(20-02-2018, 10:49 PM)Dadjosm
(20-02-2018, 05:00 PM)X3non
(20-02-2018, 01:43 PM)Dadjosm Hey guess and gurus, help me with an infinix phone that decided not to work again after charging it overnight, I have flashed it, changed the calibration with new working one from market, still not working.

Help a friend please, thanks for the help in advance

what is the current state of the phone now? [totally dead, stuck at boot, etc]
what was wrong with the phone before you flashed and how did the problem begin?


The phone doesn't have any other problem apart from the touch pad and it boots normally.

It started after overcharging it over the night then the calibration doesn't respond in every area

Have you tried restore factory or flashing the firmware?
Dadjosm
Dadjosm
Dadjosm
Newbie
4
21-02-2018, 06:56 AM
#5



(20-02-2018, 11:45 PM)innagee
(20-02-2018, 10:49 PM)Dadjosm
(20-02-2018, 05:00 PM)X3non
(20-02-2018, 01:43 PM)Dadjosm Hey guess and gurus, help me with an infinix phone that decided not to work again after charging it overnight, I have flashed it, changed the calibration with new working one from market, still not working.

Help a friend please, thanks for the help in advance

what is the current state of the phone now? [totally dead, stuck at boot, etc]
what was wrong with the phone before you flashed and how did the problem begin?


The phone doesn't have any other problem apart from the touch pad and it boots normally.

It started after overcharging it over the night then the calibration doesn't respond in every area

Have you tried restore factory or flashing the firmware?

Yes
maxpayne
maxpayne
maxpayne
Contributor
2,873
21-02-2018, 11:29 AM
#6
(21-02-2018, 06:56 AM)Dadjosm Yes

Boot the phone into Factory Mode (Volume down + Power). What are the options you have there

Sent from my Infinix X510 using Hovatek Mobile
Dadjosm
Dadjosm
Dadjosm
Newbie
4
24-02-2018, 09:06 PM
#7
It shows the testing menus and I tested the calibration from there, still no input
xerxes
xerxes
xerxes
Senior Member
8,355
25-02-2018, 10:01 AM
#8
(24-02-2018, 09:06 PM)Dadjosm It shows the testing menus and I tested the calibration from there, still no input

That means it is a hardware related problem, you will have to try replacing the calibrator.
hovatek
hovatek
hovatek
Administrator
49,570
26-02-2018, 11:06 AM
#9
(24-02-2018, 09:06 PM)Dadjosm It shows the testing menus and I tested the calibration from there, still no input

Can I see a screenshot of the options you have in factory mode

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram