Phone not starting after unsuccessful flashing
Phone not starting after unsuccessful flashing
(16-09-2014, 01:55 PM)chaiko I flashed clockworkmod on my tecno m3 I mistakenly format my system it now when I on phone it only show TECNO ..notin more please what wil I do
(16-09-2014, 01:55 PM)chaiko I flashed clockworkmod on my tecno m3 I mistakenly format my system it now when I on phone it only show TECNO ..notin more please what wil I do
(16-09-2014, 01:34 PM)Androhelp I cross checked and confirmed the following behaviour--
1) I always got the 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM Failed!" error in whenever --
a) tried to 'Format' (including preloader)
b) at the time of selectinging all modules (preloader, bootimage etc) mentioned by scatter file and 'Download'
c) try to only 'Download' the preloader
In all the above cases, the 'DA DL all with checksum' was ticked in General setting of 'Option'
I also confirmed that whenever the phone is connected, the 'MTK USB Port (COM3) was showing in ports of 'Device Manager'. There was no exclamation sign noticed. (even though it is an accepted fact that the device was getting diconnected/reconnected every now and then)
The SP Flash Tool version details is in the snapshots attached herewith. Please see the details in the logs and snapshots attached and advice further. Thanks.
(16-09-2014, 02:35 PM)hovatek(16-09-2014, 01:34 PM)Androhelp I cross checked and confirmed the following behaviour--
1) I always got the 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM Failed!" error in whenever --
a) tried to 'Format' (including preloader)
b) at the time of selectinging all modules (preloader, bootimage etc) mentioned by scatter file and 'Download'
c) try to only 'Download' the preloader
In all the above cases, the 'DA DL all with checksum' was ticked in General setting of 'Option'
I also confirmed that whenever the phone is connected, the 'MTK USB Port (COM3) was showing in ports of 'Device Manager'. There was no exclamation sign noticed. (even though it is an accepted fact that the device was getting diconnected/reconnected every now and then)
The SP Flash Tool version details is in the snapshots attached herewith. Please see the details in the logs and snapshots attached and advice further. Thanks.
SP flash tool is now able to detect the phone properly from all the logs. problem is it doesn't think the ROM and your phone are meant for each other. Now that we're clear on the problem, i need you to shed more light on something you said. You said
" 1) I always got the 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM Failed!" error in whenever --
a) tried to 'Format' (including preloader)..."
I need you to explain what exactly you mean by this step as in exactly how you went about it. Because format only ask you if you want to also format Bootloader (format whole flash) or not. Where exactly did preloader come into formatting? or was it a typo (you actually meant to type Bootloader)?
(16-09-2014, 02:47 PM)Androhelp Thanks for the quick revert back and apologies for the confusion. I typed wrongly as 'preloader' instead of 'BootLoader'. Also loaded the snapshots for better clarity. Please let me know for any clarification/information needed. Thanks.
(16-09-2014, 05:21 PM)hovatek(16-09-2014, 02:47 PM)Androhelp Thanks for the quick revert back and apologies for the confusion. I typed wrongly as 'preloader' instead of 'BootLoader'. Also loaded the snapshots for better clarity. Please let me know for any clarification/information needed. Thanks.
Your really shouldn't be getting this error during format.
1. Untick the validation box and try again.
2. Consider formatting with a lower version, maybe v 3.13
3. Try a different scatter file for the same model
(16-09-2014, 06:29 PM)Androhelp(16-09-2014, 05:21 PM)hovatek(16-09-2014, 02:47 PM)Androhelp Thanks for the quick revert back and apologies for the confusion. I typed wrongly as 'preloader' instead of 'BootLoader'. Also loaded the snapshots for better clarity. Please let me know for any clarification/information needed. Thanks.
Your really shouldn't be getting this error during format.
1. Untick the validation box and try again.
2. Consider formatting with a lower version, maybe v 3.13
3. Try a different scatter file for the same model
Please find my reply below--
1. Untick the validation box and try again.
Same error (error 4032)- 'Enable DRAM Failed'
2. Consider formatting with a lower version, maybe v 3.13
Tried with old version but still same error.
3. Try a different scatter file for the same model
Stock ROM for my phone model has been Downloaded afresh from another internet site now and upon testing, found the same error.
Please see the snapshots and logs attached herewith.
(16-09-2014, 07:44 PM)Androhelp Upon further testing of the old version SP Flash Tool, when I clicked to 'Download' or 'Firmware Upgrade', got the attached error (error 2005).
When try to download only 'preloader' module, SP Flash shows error 1013 as snapshot attached. Please suggest.