Hello, I need help with my Infinix Hot 40i X6528B.
My phone is on firmware/build:
X6528B-F069AbAeBi-T-TR-241211V200 (Turkey).
I was trying to root the phone. I successfully unlocked the bootloader. I dumped the original boot.img from my phone and patched it with Magisk. After flashing the patched boot.img, the phone became stuck on the Infinix logo.
I still have a backup of the original boot.img.
I restored the original boot.img to both boot_a and boot_b using the KraitsAndKSN tool. Both partitions were written successfully (100%), but the phone is still stuck on the Infinix logo.
Recovery mode does not open.
When I connect the phone to my PC, Windows detects it as:
SPRD U2S Diag (COM7).
I don't have the exact V200 PAC firmware and I have been unable to find a free download.
I don't mind losing my personal data. My main goal is to make the phone boot again.
Could you please tell me the safest way to recover this phone? Is there a way to flash or restore the required partitions without the exact V200 PAC firmware?
If a stock ROM/PAC is required, could you please provide or point me to the exact firmware for:
X6528B-F069AbAeBi-T-TR-241211V200
"I was trying to root the phone. I successfully unlocked the bootloader. I dumped the original boot.img from my phone and patched it with Magisk. After flashing the patched boot.img, the phone became stuck on the Infinix logo." did you signed the img? because android 9.0+ require you to sign the imgs you modify
Yes, I tried to sign the patched boot.img using the Potpisat_Boot.bat tool from the KraitsAndKSN package.
After the patched boot caused the phone to get stuck on the Infinix logo, I restored my original boot.img to both boot_a and boot_b. Both partitions were written successfully, but the phone is still stuck on the Infinix logo.
The phone is detected by Windows as SPRD U2S Diag (COM7).
I still have the original boot.img backup.
Could you please tell me what I should do next to recover the phone?
umm after some researching i found out that your phone is an SPD phone on android 13, so yep you need to sign the boot img, if you can, please dump the main vbmeta img with the boot magisk patched img and the original boot img the non patched one the original one and upload them to mega or mediafire or terabox and i'll sign them then send the to you so you can flash them, AGAIN THE MAIN VBMETA because there's system vbmeta, system ext vbmeta and more, i need the main one with the boot img, also don't try the fastboot disable vbmeta command because this won't work AT ALL
upload the original non-touched boot img with the original non-touched vbmeta and the patched boot img so i can see the details of the original img and the way it's signed so i can sign the boot img patched magisk one with the vbmeta
"#8
No, I don't have Ubuntu installed on my computer.
I only have Windows 11 installed." hmmmmm ok no problem................... ummmm can you go on your phone to fastbootd? not the bootloader-fastboot, because fastbootd is the userspace where you can successfully flash modified imgs