Infinix Hot 40i X6528B V200 stuck on Infinix logo after Magisk

[Please help] Infinix Hot 40i X6528B V200 stuck on Infinix logo after Magisk

20

Yesterday, 12:01 PM

#11

No, I cannot enter fastbootd.

The phone is currently stuck on the Infinix logo. I can only get the phone detected by Windows as SPRD U2S Diag (COM7). I cannot access recovery mode or fastbootd.

I still have the original boot.img and vbmeta.img.

I also recovered the Magisk-patched boot image from the Recycle Bin. I will rename it to boot_magisk_patched.img so it is clear that this is the Magisk-patched file.

Please let me know what I should do next.

Mouhamed Nadhem Elgharrese.
Techie Member

63

Yesterday, 12:03 PM

#12

#11

"No, I cannot enter fastbootd.

The phone is currently stuck on the Infinix logo. I can only get the phone detected by Windows as SPRD U2S Diag (COM7). I cannot access recovery mode or fastbootd." do you have the original full firmware?

aliekbereldek01
Junior Member

20

Yesterday, 12:04 PM

#13

No, I cannot enter fastbootd.

The phone is stuck on the Infinix logo. I cannot access recovery mode or fastbootd. Windows detects the phone as SPRD U2S Diag (COM7).

I still have the original boot.img and vbmeta.img, and I also recovered the Magisk-patched boot.img from the Recycle Bin.

Please tell me what I should do next.

Mouhamed Nadhem Elgharrese.
Techie Member

63

Yesterday, 12:09 PM

#14

"#13
No, I cannot enter fastbootd.

The phone is stuck on the Infinix logo. I cannot access recovery mode or fastbootd. Windows detects the phone as SPRD U2S Diag (COM7)." don't panic bro, umm do you have the original firmware?

aliekbereldek01
Junior Member

20

Yesterday, 12:12 PM

#15

Yes. I still have the original boot.img that I dumped directly from the phone before patching it with Magisk. I also have the original vbmeta.img.

If you want, I can upload these files to Mega, MediaFire or another file-sharing service and send you the download link. Please let me know which files you need.

aliekbereldek01
Junior Member

20

Yesterday, 12:20 PM

#16

I have prepared the files. I have included the original boot.img, the Magisk-patched boot.img, and the vbmeta files. I can upload the ZIP archive to Mega, MediaFire or another file-sharing service and send you the link. Please let me know if you need any additional files.

Mouhamed Nadhem Elgharrese.
Techie Member

63

Yesterday, 12:21 PM

#17

ok upload them on Mega then share with me the download link

aliekbereldek01
Junior Member

20

Yesterday, 12:29 PM

#18

Yes, I have uploaded the files to MEGA:
MEGA download link⁠: https://mega.nz/file/t60yRLab#njsFvU2-EI...Ade74n0id4

The ZIP contains:

* boot_original.img — original unpatched boot image
* boot_magisk_patched.img — Magisk-patched boot image
* vbmeta_original.img — original vbmeta image
* vbmeta.img — vbmeta image

My phone is still stuck on the Infinix logo and I cannot enter fastbootd. It is detected by Windows as SPRD U2S Diag (COM7).

Please let me know what I should do next or if you need any other files. Thank you!

Mouhamed Nadhem Elgharrese.
Techie Member

63

Yesterday, 01:09 PM

#19

i almost finished, do you have the firmware? you can download it, to flash it you need to download the ResearchDownload tool, load the firmware .pac file by pressing the gear icon on the tool, then go to your downloads folder then press on the firmware .pac file then press on the start button, you'll find it after those two gears, press it then hold and press the volume down and power button on your phone until the screen goes black, then immediately plug the data cable to your phone and to the pc and you'll see fdl1 is flashing, wait until the flashing is done, when it finishes it will say, POWER OFF in green, don't unplug the phone just press the power button until the words on the tool changes, and unplug it and still hold the power button until you see the logo, once you see the logo and it boots normally we're good, then i'll provide you the signed patched boot img and vbmeta and i'll tell you what to do

aliekbereldek01
Junior Member

20

Yesterday, 01:47 PM

#20

Unfortunately, I do not have the stock firmware (.pac file) for this exact model (X6528B-F069AbAeBi-T-TR-241211V200). Since this is a specific Turkey (TR) region firmware, I couldn't find a free download link for it anywhere on the internet.I am completely stuck at this point because of the missing .pac file. Could you please provide a download link for this specific Turkey firmware if you have access to it?Alternatively, is there any way you can provide me with the signed, patched boot.img and vbmeta.img files so that I can flash them directly via the spd_dump (Kraits) tool without needing the full .pac file? I don't mind losing my personal data; I just want to unbrick and revive my phone.Thank you so much for your amazing support and time!

View a Printable Version

Users browsing this thread:
2 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions

Important Notice