[Please help] MT6878 auth file needed - Tecno Camon 40 Pro 5G
[Please help] MT6878 auth file needed - Tecno Camon 40 Pro 5G
Yesterday, 02:21 PM
Device: Tecno Camon 40 Pro 5G (CM7), MT6878 Dimensity 7300
Requesting auth file
ME_ID: 91EE6ABA4F60A83306CFC2C9D2CF36D9
SOC_ID: 76E14740BDE25705AF19A80053F529B75F8804415EFB264FD6213F9B9DAD7536
DAA enabled, SLA disabled, SBC enabled
Device stuck in preloader/BROM loop after flashing incompatible boot partition (via mtkclient). mtkclient reports "Auth file is required. Use --auth option." Kamakiri exploit fails on this chip. Need auth file to reflash stock firmware via mtkclient or SP Flash Tool.
Yesterday, 02:28 PM
Requesting auth file
ME_ID: 91EE6ABA4F60A83306CFC2C9D2CF36D9
SOC_ID: 76E14740BDE25705AF19A80053F529B75F8804415EFB264FD6213F9B9DAD7536
DAA enabled, SLA disabled, SBC enabled
Device stuck in preloader/BROM loop after flashing incompatible boot partition (via mtkclient). mtkclient reports "Auth file is required. Use --auth option." Kamakiri exploit fails on this chip. Need auth file to reflash stock firmware via mtkclient or SP Flash Tool.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
