Good Evening Hovatek,
I have deleted the following partitions on my device:
Super
LK
Dtbo
Boot
Vbmeta
Vbmeta System
Vbmeta Vendor
Now my device is blank, but it is still detected by my PC.
I have installed many drivers, and it is successfully detected as VCOM 5.
Using Meta Tool and Android Utility still works.
Preloader to BROM (I think this works).
Rebooting to Fastboot (but still a black screen).
Using SP Flash Tool, I encountered an error: Error 0xC0060001 Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)
My device is Itel P55 5G (MTK 6833).
I would really appreciate it if Hovatek could provide a solution.
Thank you, Hovatek.
I have deleted the following partitions on my device:
Super
LK
Dtbo
Boot
Vbmeta
Vbmeta System
Vbmeta Vendor
userdata
metadata
Now, my device is blank but still detectable by the PC.
I have installed many drivers, and it is detected in VCOM.
Using Meta Tool and Android Utility still works.
Preloader to Brom (I think this worked).
Reboot Fastboot (but still a black screen).
Using SP Flash Tool, I encountered an error:
Error 0xC0060001
Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)
Driver Status: Detected as Preloader
My Device: Itel P55 5G (MTK 6833).
Driver Status: Detected as Preloader
My Device: Itel P55 5G (MTK 6833), but when switching to Brom mode, it sometimes disconnects and reconnects repeatedly.
I have tried using MTK Client, and while running some commands, the system detects the device, but then it fails and disconnects.
But sir, when I go to BROM it always reconnects continuously.
In device manager detected VCOM Preloader, Still when I Crash to BROM in MTK Utility detected VCOM Bootloader.
And I tried to reboot to fastboot successfully but still Black Blank
here is the Log from MTK Utility
1. Waiting for mtk usb device... ok
BootMode : BootLoader [COM5]
USBDriver : wdm_usb
Driver Version : 3.0.1504.0
DateDriver : 1-22-2015
Provider Name : MediaTek Inc.
Connecting to BootROM ......
Chipset MT6833
Dimension Recognizer 700
Info 8A00_CA00_0000_Palmer
Switch preloader to bootrom... crash successful!
2. Waiting for mtk usb device... ok
BootMode : BootLoader [COM5]
USBDriver : wdm_usb
Driver Version : 3.0.1504.0
DateDriver : 1-22-2015
Provider Name : MediaTek Inc.
Start a handshake with Preloader...
PreloaderCmd::CMD_BootAsFASTBOOT(): Received READY successfully!
Send Boot Mode Switch Request...
reboot to fastboot mode success!
reboot to fastboot mode success!
