Failed to create tree! using motorola hawaiip g22 twrp tool

Home Forum Blog Private Support Courses

Our courses are now on YouTube! Start Watching

Hovatek Forum OPERATING SYSTEMS Android Failed to create tree! using motorola hawaiip g22 twrp tool

Failed to create tree! using motorola hawaiip g22 twrp tool

Failed to create tree! using motorola hawaiip g22 twrp tool

View a Printable Version

Xelso
Newbie

4

03-12-2024, 05:18 PM

#1

Hi, greetings, thanks for doing this, it would be great to get a twrp for the motorola g22 Hawaiip mtk6765H. i made several attempts in the Hovatek online twrp tool, but when uploading the files it gives an error message, please if you can help it would be great, thanks. in the patch.zip file is the boot.img vbmeta_vendor.img, and in the vendor/firmware folder: ILITEK_FW.hex novatek_ts_fw.bin all files are extracted from the stock rom file without magisk. i would like to know if i'm doing it right please, thanks for your help.

https://mega.nz/file/DRJ2DSDR#n9xTbzJdrH...QxaK8I7oyA

This post was last modified: 03-12-2024, 05:27 PM by Xelso.

Xelso
Newbie

4

03-12-2024, 06:06 PM

#2

is it possible to get full root access through the new twrp?, with magisk you get partial root access and it does not allow you to modify or delete files, or junk applications that the firmware contains, that is the reason for the query if it is necessary for me to send you the boot. img and the other patch files with magisk included, I would like to get full root access and be able to modify the stock rom to my liking, in addition to being able to do everything that twrp generally allows you to do.

Xelso
Newbie

4

03-12-2024, 06:46 PM

#3

In this new file I was able to obtain directly from the device with root access with Magisk, the files, boot_a.img boot_b.img vendor_boot_a.img vendor_boot_b.img and in the path root/vendor/firmware ILITEK_FW.hex novatek_ts_fw.bin I hope I can contribute what is necessary to speed up your work. Thanks.

https://mega.nz/file/6FQAQKgD#nKhMe3oF2r...TucAXFs5xw

maxpayne
Intern

4,774

29-12-2024, 09:10 PM

#4

(03-12-2024, 06:06 PM)Xelso is it possible to get full root access through the new twrp?, with magisk you get partial root access and it does not allow you to modify or delete files, or junk applications that the firmware contains..

What you refer to as "partial root" might be your firmware being read-only and not an issue with root or magisk per se

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

hovatek
Administrator

50,890

29-12-2024, 09:27 PM

#5

Mediatek Course

Mediatek Course

(03-12-2024, 06:46 PM)Xelso In this new file I was able to obtain directly from the device with root access with Magisk, the files, boot_a.img boot_b.img vendor_boot_a.img vendor_boot_b.img and in the path root/vendor/firmware ILITEK_FW.hex novatek_ts_fw.bin I hope I can contribute what is necessary to speed up your work. Thanks.

https://mega.nz/file/6FQAQKgD#nKhMe3oF2r...TucAXFs5xw

vendor_boot is blank so you should use only boot.img.
Rename boot_a.img to boot.img and upload that in the TWRP Builder.
Attached below is what your patch.zip should look like.
You upload boot.img and patch.zip at the same time i.e you select both files

This post was last modified: 29-12-2024, 09:30 PM by hovatek.

Attached Files

patch.zip
Size: 93.37 KB / Downloads: 48

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Users browsing this thread:
1 Guest(s)