iPhone 15 Pro Max Clone (MT6582), stuck on boot after installing Revanced APP.

Neofito32
Enthusiastic Member

6

24-10-2024, 04:21 AM

#1

Hi thanks for your help an invaluable source of knowledge.

I want to ask you if someone would you mind to share the ROM for an iPhone Pro Max 15 (brand WELCOME) . I left you the data from the Miracle Thunder Flash. Off course after soft-bricking the smartphone.

The smartphone was rooted using KingRoot for PC. It was good that time.
Then some months later I try to update the Google Play Services cause I need to get some services from Google. The GAPPS provided on the phone did not let me log in.
Then I used to use Some other playstore not from Google but All was OK. So I decided that I need some revanced services and installed microG Services v0.3.1.4.240913 (app.revanced.android.gsm) for Huawey. Finally at the night reboot the device after disabling some services: Google Play Store and Google Service.

The device stuck on logo "WELCOME" and never see again the load of the system.

Some Info Provided by Miracle Thunder:

Code:

  Connecting to Phone,Wait..

  Connected to Phone.

  CPU: MT6582 SW:0001 Ver: CA01

  Preparing data..

  Downloading Boot8...

  EMMC Size: 0x03A3E00000

  RPMB Size: 0x00400000

  Flash Type: EMMC

  INT/EXT RAM  Size: 0x20000/0x40000000

  System Info list:

  ro.build.display.id:

LRX21M test-keys

  ro.build.version.incremental:1700106779

  ro.build.version.release:5.0

  ro.product.model:I15 Pro max

  ro.product.brand:Welcome

  ro.product.manufacturer:welcome

  ro.board.platform:mt6582

I'm attached an descriptive video, where I compare my iPhone System (iPro 15 Max) vs. S21 Clone with similar operating system MT6582.

maxpayne
Intern

4,448

31-10-2024, 09:14 AM

#2

(24-10-2024, 04:21 AM)Neofito32 ...
The device stuck on logo "WELCOME" and never see again the load of the system.

Have you done a full dump of the firmware in its current state?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

Neofito32
Enthusiastic Member

6

01-11-2024, 12:09 AM

#3

Yes, I did it. Then try to porting from another similar ROM. The same kernel version, the same android version 5.0, the same brand "WELCOME", the same MT6582 SOC. I've repacked the boot image, the ported system image. No get success several failed intents. After all. Now I'm in process to get full working new ported SYSTEM and in a future trying to restore the original ROM. Iphone 15 Pro Max "WELCOME". Here are the the same specifications:

https://specdevice.com/showspec.php?id=2...a172283686

fergz
Newbie

1

01-11-2024, 10:04 PM

#4

Did You erase userdata and cache.... and try to reboot after that?
Can You provide "adb shell dmesg"?

Neofito32
Enthusiastic Member

6

02-11-2024, 04:26 AM

#5

Quote:Did You erase userdata and cache.... and try to reboot after that?
Can You provide "adb shell dmesg"?

When the first time that was stuck in boot logo, I tried to disabling APPs with ADB AppControl, the console show that something was malfunction. I didn't remember exactly. But no any Apps listed in menu. I didn't sure, I guess only Cyber Cat Bridge was listed. Using the Tools-Boot, in recovery mode. The device was booting in recovery mode... After the hard-reset never again have access with ADB commands neither ADB AppControl.

maxpayne
Intern

4,448

07-11-2024, 09:43 AM

#6

(02-11-2024, 04:26 AM)Neofito32 When the first time that was stuck in boot logo, I tried to disabling APPs with ADB AppControl, the console show that something was malfunction. I didn't remember exactly. But no any Apps listed in menu. I didn't sure, I guess only Cyber Cat Bridge was listed. Using the Tools-Boot, in recovery mode. The device was booting in recovery mode... After the hard-reset never again have access with ADB commands neither ADB AppControl.

The factory reset would knock out USB debugging. You could unpack system.img , remove the apps you added, deodex then repack and flash the new system.img

This post was last modified: 07-11-2024, 09:48 AM by maxpayne.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

Neofito32
Enthusiastic Member

6

08-11-2024, 09:41 PM

#7

Thank You So Much, It's necessary to remove the SU bin, and the king Root from XBIN or only the APPS directory.

\system\bin\.usr\
.ku 155.71 KiB

\system\xbin\
BGW 13.33 KiB
dexdump 58.36 KiB
krdem 739.51 KiB
ku.sud 155.71
mnld 74.50
showmap 9.22
start_kusud.sh 1.85
supolicy 62.47
tcpdump 798.19

maxpayne
Intern

4,448

15-11-2024, 09:31 AM

#8

(08-11-2024, 09:41 PM)Neofito32 Thank You So Much, It's necessary to remove the SU bin, and the king Root from XBIN or only the APPS directory.

\system\bin\.usr\
.ku 155.71 KiB

\system\xbin\
BGW 13.33 KiB
dexdump 58.36 KiB
krdem 739.51 KiB
ku.sud 155.71
mnld 74.50
showmap 9.22
start_kusud.sh 1.85
supolicy 62.47
tcpdump 798.19

I don't think you need to remove the su bin since it was the changes you made that bricked the device not su

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

Neofito32
Enthusiastic Member

6

16-11-2024, 03:04 AM

#9

The deodexed image, doesn't work. But i think if I put inside (system) the parts that are missing. Kingroot App and Maybe removing something else, and then maybe It would work.
I succesfuly mounted IPro Max 13 ROM and now are Rooted. I would trying porting using this ROM, or completing the Original with this ROM.

Arghya77
Newbie

3

08-01-2025, 10:17 AM

#10

It seems like you're facing an issue with your MT6582 device being stuck on boot after installing the Revanced app. This can often be caused by conflicts between the app and the device's firmware or software incompatibilities. To troubleshoot, try booting the device into recovery mode and wiping the cache partition, which can sometimes resolve boot loop issues. If that doesn't work, you might need to consider reinstalling the stock firmware or restoring a previous backup if available. Always ensure apps are compatible with your device model to avoid such problems.

This post was last modified: 16-01-2025, 10:21 AM by hovatek.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions