We're hiring! Apply Now

Hovatek Forum MOBILE Android Need help to revive a iPhone 14 pro Clone MT6580 - its not hardware 100%...

Need help to revive a iPhone 14 pro Clone MT6580 - its not hardware 100%...

Need help to revive a iPhone 14 pro Clone MT6580 - its not hardware 100%...

Formingus
Formingus
Formingus
Newbie
4
05-08-2024, 08:15 PM
#1



This is Genuine Phone Info before it dies!!

Quote:USB: HIGH-SPEED
Boot done FireFly
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 24
Select info source... [recovery] Ok
  Patch Level: O11019
  Display ID: LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828
  SW Version: 1693191851
  Ver. CodeName: REL
  Ver. Release: 8.1.0
  Sec. Patch: 2022-10-05
  Build Time: 28-Aug-23 3:03:17 AM
  Product Model: i14_Pro
  Product Brand: alps
  Product Name: full_b9fa2_f20c_i14pro_e
  Product Device: b9fa2_f20c_i14pro_e
  CPU: armeabi-v7a,armeabi
  Product Manfct: alps
  Product Info: b9fa2_f20c_i14pro_e
  SW: full_b9fa2_f20c_i14pro_e-user 8.1.0 O11019 1693191851 test-keys
  Product Board: b9fa2_f20c_i14pro_e
  Board Platform: mt6580
Device ID: i14-pro-b9fa2-f20c-i14pro-e-full-b9fa2-f20c-i14pro-e
Strategy: [none|generic]
Firmware ID: MT6580_alps_i14_Pro_OSv8.1.0_LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828_O11019_b9fa2_f20c_i14pro_e
Verify firmware [MT6580_alps_i14_Pro_OSv8.1.0_LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828_O11019_b9fa2_f20c_i14pro_e]...

I have saved a genuine boot line from CM2MT2
[Image: Fast-Stone-Editor5.png]

I have saved genuine files from CM2MT2 memory tools 
[Image: 2024-08-03-204828.jpg]

When I try to flash it with different firmware I get a flashing loop on system.bin or vendor.bin

When I try to flash each saved part via the memory tool, the flash is complete but the phone remains in MTK COM USB Port State
Really need help from some expert...
maxpayne
maxpayne
maxpayne
Intern
4,119
07-08-2024, 03:24 PM
#2
(05-08-2024, 08:15 PM)Formingus When I try to flash it with different firmware I get a flashing loop on system.bin or vendor.bin

Please explain what you mean


(05-08-2024, 08:15 PM)Formingus When I try to flash each saved part via the memory tool, the flash is complete but the phone remains in MTK COM USB Port State

Did your backup include a preloader

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Formingus
Formingus
Formingus
Newbie
4
09-08-2024, 06:34 PM
#3
Please explain what you mean

So, when flash starts it goes until system.bin, after system.bin flash is complete it will start again flashing the system.bin
check video https://www.youtube.com/watch?v=0zkl1NtMtdQ

Did your backup include a preloader
Yes I did, list of saved files
BOOT.bin
CACHE.bin
EXPDB.bin
FLASHINFO.bin
FRP.bin
KEYSTORE.bin
LK.bin
LK2.bin
LOGO.bin
METADATA.bin
NVDATA.bin
NVRAM.bin
ODMDTBO.bin
OEMKEYSTORE.bin
PARA.bin
PGPT.bin
PRELOADER.bin
PROINFO.bin
PROTECT1.bin
PROTECT2.bin
RECOVERY.bin
SECCFG.bin
SECRO.bin
SYSTEM.bin
VENDOR.bin
maxpayne
maxpayne
maxpayne
Intern
4,119
10-08-2024, 10:49 AM
#4
(09-08-2024, 06:34 PM)Formingus PRELOADER.bin

Its probably still stuck in BROM because you haven't flashed a preloader
You might need to process the preloader.bin using WWR.
Upload the preloader.bin and drop the link
This post was last modified: 10-08-2024, 10:50 AM by maxpayne.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Raaj2707
Raaj2707
Raaj2707
Newbie
1
17-09-2024, 05:54 AM
#5



(05-08-2024, 08:15 PM)Formingus This is Genuine Phone Info before it dies!!

Quote:USB: HIGH-SPEED
Boot done FireFly
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 24
Select info source... [recovery] Ok
  Patch Level: O11019
  Display ID: LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828
  SW Version: 1693191851
  Ver. CodeName: REL
  Ver. Release: 8.1.0
  Sec. Patch: 2022-10-05
  Build Time: 28-Aug-23 3:03:17 AM
  Product Model: i14_Pro
  Product Brand: alps
  Product Name: full_b9fa2_f20c_i14pro_e
  Product Device: b9fa2_f20c_i14pro_e
  CPU: armeabi-v7a,armeabi
  Product Manfct: alps
  Product Info: b9fa2_f20c_i14pro_e
  SW: full_b9fa2_f20c_i14pro_e-user 8.1.0 O11019 1693191851 test-keys
  Product Board: b9fa2_f20c_i14pro_e
  Board Platform: mt6580
Device ID: i14-pro-b9fa2-f20c-i14pro-e-full-b9fa2-f20c-i14pro-e
Strategy: [none|generic]
Firmware ID: MT6580_alps_i14_Pro_OSv8.1.0_LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828_O11019_b9fa2_f20c_i14pro_e
Verify firmware [MT6580_alps_i14_Pro_OSv8.1.0_LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828_O11019_b9fa2_f20c_i14pro_e]...

I have saved a genuine boot line from CM2MT2
[Image: Fast-Stone-Editor5.png]

I have saved genuine files from CM2MT2 memory tools 
[Image: 2024-08-03-204828.jpg]

When I try to flash it with different firmware I get a flashing loop on system.bin or vendor.bin

When I try to flash each saved part via the memory tool, the flash is complete but the phone remains in MTK COM USB Port State
Really need help from some expert...



Ihave same phone . My phone was brick but I revive the from some other Chinese firmware it worked but no sound all other functions work properly, I need your backup file, so I get rid from sound problem because you have original backup file please it's a request 
maxpayne
maxpayne
maxpayne
Intern
4,119
19-09-2024, 10:44 AM
#6
(17-09-2024, 05:54 AM)Raaj2707 Ihave same phone . My phone was brick but I revive the from some other Chinese firmware it worked but no sound all other functions work properly, I need your backup file, so I get rid from sound problem because you have original backup file please it's a request 

Create a thread by clicking Ask Question at the top

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt