We're hiring! Apply Now

Hovatek Forum HARDWARE SIM / Network unlock My Qualcomm usb 6000# modem can't read Ussd nor Voice

My Qualcomm usb 6000# modem can't read Ussd nor Voice

My Qualcomm usb 6000# modem can't read Ussd nor Voice

davidmalambika
davidmalambika
davidmalambika
Techie Member
61
25-03-2023, 02:58 PM
#1



Hello, I have this modem HSPA USB MODEM i accidentally disabling Voice and USSD Feature and i don't know how to make it work like it used to, and now it can not connect  because when i connect it authenticate for a while and then disconnect itself without being connected like it used to. the problem started when it started to lose connection while it is still connected. So i sometimes disconnect it and reconnect it again to have internet. so i install a software a dashboard Hybrid or 1x where it comes with zoom title. when i was installing this driver it ask me to connect my modem to install drivers after did that since then Voice, Phonebook,sms and USSD feature stopped to work when i dial USSD a notification appear "Please confirm the USSD feature" and Network signal keeps falling from 5 bars to two bars and sometimes "unknown" so is there a way to solve it or enable my dashboard again? i add attachment where it shows only 2 bars signal.

these are my Model details:
Manufacture : Gemtek
Modem : HSDPA
IMEI: 353928044022197
Chipset : Qualcomm MSM6280
Sim Lock status : Unlocked
Attached Files
.jpg
567.jpg
Size: 54.47 KB / Downloads: 2
AutoResponder
AutoResponder
AutoResponder
Verified Account
609
25-03-2023, 02:58 PM
#2
Thanks for posting davidmalambika! Our current workload determines how soon you will get replies. If you need fast replies then try our Private Support
maxpayne
maxpayne
maxpayne
Intern
4,101
27-03-2023, 10:09 AM
#3
(25-03-2023, 02:58 PM)davidmalambika Hello, I have this modem HSPA USB MODEM i accidentally disabling Voice and USSD Feature and i don't know how to make it work like it used to, and now it can not connect  because when i connect it authenticate for a while and then disconnect itself without being connected like it used to. the problem started when it started to lose connection while it is still connected. So i sometimes disconnect it and reconnect it again to have internet. so i install a software a dashboard Hybrid or 1x where it comes with zoom title. when i was installing this driver it ask me to connect my modem to install drivers after did that since then Voice, Phonebook,sms and USSD feature stopped to work when i dial USSD a notification appear "Please confirm the USSD feature" and Network signal keeps falling from 5 bars to two bars and sometimes "unknown" so is there a way to solve it or enable my dashboard again? i add attachment where it shows only 2 bars signal.

these are my Model details:
Manufacture : Gemtek
Modem : HSDPA
IMEI: 353928044022197
Chipset : Qualcomm MSM6280
Sim Lock status : Unlocked

If I understand you.. you are saying all these began after you flashed a new dashboard right?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
davidmalambika
davidmalambika
davidmalambika
Techie Member
61
27-03-2023, 04:27 PM
#4
(27-03-2023, 10:09 AM)maxpayne
(25-03-2023, 02:58 PM)davidmalambika Hello, I have this modem HSPA USB MODEM i accidentally disabling Voice and USSD Feature and i don't know how to make it work like it used to, and now it can not connect  because when i connect it authenticate for a while and then disconnect itself without being connected like it used to. the problem started when it started to lose connection while it is still connected. So i sometimes disconnect it and reconnect it again to have internet. so i install a software a dashboard Hybrid or 1x where it comes with zoom title. when i was installing this driver it ask me to connect my modem to install drivers after did that since then Voice, Phonebook,sms and USSD feature stopped to work when i dial USSD a notification appear "Please confirm the USSD feature" and Network signal keeps falling from 5 bars to two bars and sometimes "unknown" so is there a way to solve it or enable my dashboard again? i add attachment where it shows only 2 bars signal.

these are my Model details:
Manufacture : Gemtek
Modem : HSDPA
IMEI: 353928044022197
Chipset : Qualcomm MSM6280
Sim Lock status : Unlocked

If I understand you.. you are saying all these began after you flashed a new dashboard right?

Yeah...
davidmalambika
davidmalambika
davidmalambika
Techie Member
61
28-03-2023, 01:19 PM
#5



(27-03-2023, 04:27 PM)davidmalambika
(27-03-2023, 10:09 AM)maxpayne
(25-03-2023, 02:58 PM)davidmalambika Hello, I have this modem HSPA USB MODEM i accidentally disabling Voice and USSD Feature and i don't know how to make it work like it used to, and now it can not connect  because when i connect it authenticate for a while and then disconnect itself without being connected like it used to. the problem started when it started to lose connection while it is still connected. So i sometimes disconnect it and reconnect it again to have internet. so i install a software a dashboard Hybrid or 1x where it comes with zoom title. when i was installing this driver it ask me to connect my modem to install drivers after did that since then Voice, Phonebook,sms and USSD feature stopped to work when i dial USSD a notification appear "Please confirm the USSD feature" and Network signal keeps falling from 5 bars to two bars and sometimes "unknown" so is there a way to solve it or enable my dashboard again? i add attachment where it shows only 2 bars signal.

these are my Model details:
Manufacture : Gemtek
Modem : HSDPA
IMEI: 353928044022197
Chipset : Qualcomm MSM6280
Sim Lock status : Unlocked

If I understand you.. you are saying all these began after you flashed a new dashboard right?

I don't know if it was flashing new dashboard but what i did was downloading another software to run as the same installed software. the software has these options 1x and HYBRID since then my dashboard feature Voice, USSD, sms, phonebook, even Modem itself can't connect
maxpayne
maxpayne
maxpayne
Intern
4,101
02-04-2023, 08:27 AM
#6
(28-03-2023, 01:19 PM)davidmalambika If I understand you.. you are saying all these began after you flashed a new dashboard right?

I don't know if it was flashing new dashboard but what i did was downloading another software to run as the same installed software. the software has these options 1x and HYBRID since then my dashboard feature Voice, USSD, sms, phonebook, even Modem itself can't connect

You should flash back the type of software and dashboard you previously had

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
davidmalambika
davidmalambika
davidmalambika
Techie Member
61
04-04-2023, 01:41 PM
#7
(02-04-2023, 08:27 AM)maxpayne
(28-03-2023, 01:19 PM)davidmalambika If I understand you.. you are saying all these began after you flashed a new dashboard right?

I don't know if it was flashing new dashboard but what i did was downloading another software to run as the same installed software. the software has these options 1x and HYBRID since then my dashboard feature Voice, USSD, sms, phonebook, even Modem itself can't connect

You should flash back the type of software and dashboard you previously had

I tried it doesn't work
maxpayne
maxpayne
maxpayne
Intern
4,101
06-04-2023, 01:59 PM
#8
(04-04-2023, 01:41 PM)davidmalambika You should flash back the type of software and dashboard you previously had

I tried it doesn't work

Error during flashing?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt