Tecno Ke5 Dead after flash
Tecno Ke5 Dead after flash
(06-10-2022, 05:28 AM)erhiskobi Hello,
Flashed KE5 with this file - [Hovatek] Tecno Spark Go 2020(KE5-H6123ABC-QGo-GL-210809V373) using mtk bypass utility and after successful flashing, device didn't boot up. Makes sound when plugged in to PC and indicator light is on at the top but that's it. What to do?
(06-10-2022, 02:50 PM)Abdulakeem14(06-10-2022, 05:28 AM)erhiskobi Hello,
Flashed KE5 with this file - [Hovatek] Tecno Spark Go 2020(KE5-H6123ABC-QGo-GL-210809V373) using mtk bypass utility and after successful flashing, device didn't boot up. Makes sound when plugged in to PC and indicator light is on at the top but that's it. What to do?
What's the original firmware build number before flashing this ?
(09-10-2022, 10:45 AM)erhiskobi Same with that one, I think the difference is the version. That one should be V251 or there about .. But every other thing is same
(10-10-2022, 05:53 AM)hovatekI didn't see ZAVC, RU or TU attached to the build number when I checked via Recovery mode before downloading that firmware. It was just as it is in the firmware description. The only thing I'm not sure of is the version number at the end.(09-10-2022, 10:45 AM)erhiskobi Same with that one, I think the difference is the version. That one should be V251 or there about .. But every other thing is same
There are several variants of the KE5, the highest should be about KE5-H6123ABC-QGo-GL-220616V541 . This is assuming yours isn't ZAVC, RU or TR
(18-10-2022, 09:17 AM)erhiskobi(17-10-2022, 10:01 PM)kelvinchinedu The most important thing is the last 3 number after v and u forgot to check it
Well, that has been established. So nothing can be done?