S999 Bootloader unlock
S999 Bootloader unlock
22-02-2022, 09:04 AM
For me W10_64bit works very good after i installed the appropriate Driver for the MTK Chipset.
It´s called MTK All in One, or so....
I beleave here on Hovatec are several Topics related to this.
Also for me the Infinity v 2.28 on W10 works withot any problem, newer Versions i did not checked.
In rare cases it might be a Hardware failure on your USB Port.
For work on this Devices i built up a Native USB 2.0 Port on my Desktop because sometimes USB 3.0 did not work always propperly for flashing.
Also it is very good to keep the magnetic contacts clean and if possible try another compatible magnetic Charger Cable.
Please keep in mind that there are a lot of magnetic Cables on the maket that look the same but the Pins might be twisted!!!!!
And if you ever dismanteled this Watch, please double check if you assembled it correctly.
Please have a look inside the Watch if the Contacts for the USB Pins fit perfect (not on the PCB - on the Case of the Watch).
Good luck!
22-02-2022, 09:22 AM
(22-02-2022, 09:04 AM)Actrapit For me W10_64bit works very good after i installed the appropriate Driver for the MTK Chipset.
It´s called MTK All in One, or so....
I beleave here on Hovatec are several Topics related to this.
Also for me the Infinity v 2.28 on W10 works withot any problem, newer Versions i did not checked.
In rare cases it might be a Hardware failure on your USB Port.
For work on this Devices i built up a Native USB 2.0 Port on my Desktop because sometimes USB 3.0 did not work always propperly for flashing.
Also it is very good to keep the magnetic contacts clean and if possible try another compatible magnetic Charger Cable.
Please keep in mind that there are a lot of magnetic Cables on the maket that look the same but the Pins might be twisted!!!!!
And if you ever dismanteled this Watch, please double check if you assembled it correctly.
Please have a look inside the Watch if the Contacts for the USB Pins fit perfect (not on the PCB - on the Case of the Watch).
Good luck!
Have you done it like this?
1. Press "Identify" button.
2. Press "Unlock bootloader" button.
22-02-2022, 02:54 PM
With your kindly help I've did it.
My main computer just freeze, so it was hardware issue.
On another laptop same procedure worked perfectly.
0. Upated windows 10 to LATEST version.
Install every update including optional drivers.
1. Download s/w
InfinityBox_install_CM2MT2_v2.33.7z
Drivers_MTK-SP_v5.1632_x86_x64.7z
2. Install s/w
Drivers_MTK-SP_v5.1632_x86_x64.7z
reboot
InfinityBox_install_CM2MT2_v2.33.7z
3. Run CM2MT2.
Menu: Settings -> Base settings - set my IOS account/password.
Menu: File - >save user config
Exit and run it again.
4. Chose Inifnity Firefly smarphone.
Menu: Platform -> Infninity FireFly.
5. Press Magic button.
Tab: Service -> [Un]Lock Bootloader [UD safe]
23-02-2022, 04:57 PM
(22-02-2022, 03:00 PM)Actrapit(22-02-2022, 02:54 PM)sergey1369 Very NICE!
Good to see that you finally did it, and have now a lot of Fun with this very great Device!
Please Report what Android Version you installed on the S999.
Thanks
I wanted Llneage 16 GSI (Android 9), but can't figure out how to install Google Apps.
Any changes to system/vendor partitions discarded after remount/reboot.
So I took this one crdrom-v224-201019-arm64-bgN.img (Android 10 from TrebleGSI).
reble
01-10-2022, 03:17 AM
Got this device myself under the Lokmat branding.
Could one install the generic android 10 rom with google apps on mine remotely OR if I buy dongle can one guide me through? Ive done rooting and roms in past but this is different tools and all.
Id rather not buy dongle as Id just use it to install rom and never use again honestly. So would pay one here to do it remotely if possible.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
