[X3non]

Below is a collection of different versions of LGUP CMD / Dev / Lab / Store tools. They are Windows tools for flashing .kdz & .tot files / firmware to an LG Android device

Download LGUP CMD / Dev / Lab / Store Tools (all versions)

LGUP CMD Versions

• LGUP_CMD_Ver_1_17
  https://mega.nz/file/hthmGJrC#H9EerXu2kh...lnmso6qiho
  

LGUP Dev Versions

• LGUP_Dev_Frame_Ver_1_14_3 (patched)
  https://mega.nz/file/kpYjgSrC#fhAVz5QpEM...4WQqATLla0
  

LGUP Lab Versions

• LGUP_Lab_Frame_Ver_1_16_0_3 (+ UI fixer)
  https://mega.nz/file/Ukp31AqZ#cVgMgTAPcz...ZDyPgokngU
  
  
• LGUP_Lab_Frame_Ver_1_10
  https://mega.nz/file/VwwhVIpZ#MEkOW65IGs...FKFAZhZS6A
  

LGUP Store Versions

• LGUP_Store_Frame_Ver_1_14_3
  https://mega.nz/file/st5xESKS#T5wE3-5OuD...sV5I10KsJA
  

Important Notice

• CMD_version only has no GUI, it can only be operated using command line
  
• Dev_versions have more features than lab and store versions
  
• UI fixer with lab_version 1.16.0.3 enabled the features of the dev_version and credtits to CXZa for it
  

[xuvvy]

There is no PDM option that is shown in the screenshot in any of the LGUP versions. :/

[X3non]

There is no PDM option that is shown in the screenshot in any of the LGUP versions. :/

dev version has pdm feature, follow the instructions in the readme to properly install this version

[samuel1003]

This Dev LGUP version doesnt have PDP, i tested also....

[X3non]

This Dev LGUP version doesnt have PDP, i tested also....

maybe you also didn't follow the readme instructions as well

[cxz]

There is no PDM option that is shown in the screenshot in any of the LGUP versions. :/

It's device dependent. Newer devices support it, older don't.

My UI fixer works with 1.14 too... don't know about the older versions.
https://forum.xda-developers.com/posts/80236103/

My LGUP 1.17 post at XDA - from where it has spread around...
https://forum.xda-developers.com/posts/81856765/

[samuel1003]

There is no PDM option that is shown in the screenshot in any of the LGUP versions. :/

It's device dependent. Newer devices support it, older don't.

My UI fixer works with 1.14 too... don't know about the older versions.
https://forum.xda-developers.com/posts/80236103/

My LGUP 1.17 post at XDA - from where it has spread around...
https://forum.xda-developers.com/posts/81856765/

I just came here to say the same, i tested US601 and this one show PDM option, my K500UM doesnt

[X3non]

It's device dependent. Newer devices support it, older don't.
...

thanks for sharing this

[hovatek]

I just came here to say the same, i tested US601 and this one show PDM option, my K500UM doesnt

That's weird because our copy of the K500 showed it

[cxz]

That's weird because our copy of the K500 showed it

The options comes from the dll used. So, it's possible that it's firmware dependent too.
I have said somewhere that one should run UI fixer before any new firmware...

That or any option can be put there easily, but does the firmware on device (= its LAF) or dll used support it.
That is another question...