Infinix SMART 5 X657 Red State and Verified boot enabled
Infinix SMART 5 X657 Red State and Verified boot enabled
(26-01-2021, 01:00 PM)hassansuriya1115 I was rooting my Infinix SMART 5 X657B with the help of Magisk. After unlocking bootloader and flashing with the patched_boot.img I got Red State error.
I tried flashing with SP Flash tool with the Stock Firmware but it says Verified boot is enabled. Please download signed images.
(26-01-2021, 03:32 PM)X3non(26-01-2021, 01:00 PM)hassansuriya1115 I was rooting my Infinix SMART 5 X657B with the help of Magisk. After unlocking bootloader and flashing with the patched_boot.img I got Red State error.
I tried flashing with SP Flash tool with the Stock Firmware but it says Verified boot is enabled. Please download signed images.
you didn't flash vbmeta hence the red state, you'd only need to flash boot not necessarily the full firmware to fix this
is it a backup or factory firmware you have? attach a full screenshot of the contents of the firmware
and do you have the custom DA for this model? you can try either DA for X625B or X626B @ https://www.hovatek.com/forum/thread-23339.html
(28-01-2021, 12:01 PM)X3non(28-01-2021, 04:13 AM)hassansuriya1115 I tried flashing only boot file with your suggested DA file but it didn't work.
what's the error message from both DA files? attach screenshots if possible
(29-01-2021, 11:01 AM)hassansuriya1115 First it was asking for authentication file but today I tried again and both DA File worked. I flashed boot file with both DA Files but the Red State is not fixed. It's the same. Nothing happened!
(30-01-2021, 10:13 AM)X3non(29-01-2021, 11:01 AM)hassansuriya1115 First it was asking for authentication file but today I tried again and both DA File worked. I flashed boot file with both DA Files but the Red State is not fixed. It's the same. Nothing happened!
did you flash boot.img for the exact same build number of your device?
the build number of the firmware from where you got the boot.img you flashed must match the build number of your phone, if it doesn't then you might want to consider flashing the full firmware (ensure to take note of the build number of your device, see https://www.hovatek.com/forum/thread-16005.html )
one more thing, can you specify the exact DA file that worked for you?
(30-01-2021, 10:13 AM)X3non(29-01-2021, 11:01 AM)hassansuriya1115 First it was asking for authentication file but today I tried again and both DA File worked. I flashed boot file with both DA Files but the Red State is not fixed. It's the same. Nothing happened!
did you flash boot.img for the exact same build number of your device?
the build number of the firmware from where you got the boot.img you flashed must match the build number of your phone, if it doesn't then you might want to consider flashing the full firmware (ensure to take note of the build number of your device, see https://www.hovatek.com/forum/thread-16005.html )
one more thing, can you specify the exact DA file that worked for you?
(30-01-2021, 10:56 AM)hassansuriya1115 ...The two DA Files which you mentioned above worked for me.
1: X625B
2: X626B
(30-01-2021, 10:56 AM)hassansuriya1115 Earlier, I was using this Infinix_Smart_5_X657B_MT6761_V57_200409_(by_firmwarefile.com) then I used Hovatek boot.img Infinix Smart 5 X657B (X657B-H6117DEF-QGo-OP-200409V57) [Factory / Signed] (https://www.hovatek.com/forum/thread-34537.html)
[quote="hassansuriya1115" pid='208335' dateline='1612000569']
both of these are the same, notice V57 on both filenames
[quote="hassansuriya1115" pid='208352' dateline='1612011863']
My phone is now fully dead. It's not connecting to PC.
(30-01-2021, 02:04 PM)hassansuriya1115 I was using the fourth method to find build number. The I made a scatter file and followed the steps in the video. I stuck at RAM Test because new version of SP Flash Tool doesn't offer RAM test. I cancelled the DRAM Test and after that my mobile is dead.
Now is there any solution?