Login

wahby4 · 22-08-2020, 08:04 PM

Hello,
I have problem with Tecno spark 5 Air after trying to flashing I got boot problem, the problem in the picture.

I have trying factory firmwares but the Process is Stopped in super.img file.

pls need help

thank you

wahby4 · 22-08-2020, 08:05 PM

Firmware before flashing By CM2:

MT6761__10__KD6-H6116GHIL-QGo-OP-200528V252__QP1A.190711.020__kd6_h6116

I have trying these firmwares:

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269
[Hovatek] Tecno Spark 5 Air (KD6-H6116GHIL-QGo-OP-200528V252)

**X3non** · 24-08-2020, 09:10 AM

(22-08-2020, 08:05 PM)wahby4 Wrote: Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything

wahby4 · 24-08-2020, 11:03 AM

(24-08-2020, 09:10 AM)X3non Wrote:
(22-08-2020, 08:05 PM)wahby4 Wrote: Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything

Hello,
thank you for reply

i have tested your solutions, with (KD 7 DA File & KC2 DA file & F2 LTE Auth)

By This versions:

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269

You can see the problem in screenshots:

wahby4 · 24-08-2020, 11:23 AM

(24-08-2020, 11:03 AM)wahby4 Wrote:
(24-08-2020, 09:10 AM)X3non Wrote:
(22-08-2020, 08:05 PM)wahby4 Wrote: Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything

Hello,
thank you for reply

i have tested your solutions, with (KD 7 DA File & KC2 DA file & F2 LTE Auth)

By This versions:

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269

You can see the problem in screenshots:

after uncheck vbmeta/vbmeta_system/vbmeta_vendor/super flashing Ok

but still hang on logo

wahby4 · 24-08-2020, 01:29 PM

(24-08-2020, 11:03 AM)wahby4 Wrote:
(24-08-2020, 09:10 AM)X3non Wrote:
(22-08-2020, 08:05 PM)wahby4 Wrote: Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything

Hello,
thank you for reply

i have tested your solutions, with (KD 7 DA File & KC2 DA file & F2 LTE Auth)

By This versions:

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269

You can see the problem in screenshots:

Problem Fixed

**X3non** · 25-08-2020, 03:07 PM

(24-08-2020, 01:29 PM)wahby4 Wrote: Problem Fixed with CM2 new Ver 2.15 by 'ultra Flash"
CM2 log:

Thank you very much
...

does this mean that the phone is able to boot successfully after flashing using cm2?

wahby4 · 25-08-2020, 03:19 PM

Yes , after flashing with CM2 last ver (Ultra flash) Feature.

Cm2 is flashing VBMETA file successfuly.

Sp flash tool & tecno tool rejected VBmeta file.

**X3non** · 25-08-2020, 03:43 PM

(25-08-2020, 03:19 PM)wahby4 Wrote: Yes , after flashing with CM2 last ver (Ultra flash) Feature.

Cm2 is flashing VBMETA file successfuly.

Sp flash tool & tecno tool rejected VBmeta file.

thanks for confirming this

wahby4 · 25-08-2020, 03:44 PM

You are welcome, thank You also

Login
Username:
Password:	Lost Password?
	Remember me
OR