Hovatek Forum HARDWARE SIM / Network unlock B315s-608 Power LED only after factory reset
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


B315s-608 Power LED only after factory reset

B315s-608 Power LED only after factory reset

israeljay30
israeljay30
israeljay30
Newbie
4
09-06-2020, 05:16 PM
#1



Good day everyone. May I kindly ask your assistance regarding my Huawei B315s-608 router. Initially, the router was not able to receive signal even if I change the SIM cards. I reset it but it was not able to come back to its factory setting. I was looking for help on youtube and tried USB Balong Downloader but I noticed that there was no specific USB loader for this B315 variant. Could you kindly help me with this? Thank you so much for your help.
X3non
X3non
X3non
Recognized Contributor
22,062
10-06-2020, 10:58 AM
#2
(09-06-2020, 05:16 PM)israeljay30 Good day everyone. May I kindly ask your assistance regarding my Huawei B315s-608 router. Initially, the router was not able to receive signal even if I change the SIM cards. I reset it but it was not able to come back to its factory setting. I was looking for help on youtube and tried USB Balong Downloader but I noticed that there was no specific USB loader for this B315 variant. Could you kindly help me with this? Thank you so much for your help.

you shouldn't use usbloader unless you're aware of the risk, try using usblsafe for b315 instead @ http://www.mediafire.com/file/7skkegaaqm...5.zip/file
you'll still need to look for firmwares for your device though. i think your device should be able to use same firmware as b315s-22 (not 100% sure though)
you can try using the modified firmware v21.329 @ http://www.mediafire.com/file/56s7oxebvo...0.rar/file & modified-webui @ http://www.mediafire.com/file/kf75qgmwwe...7.rar/file

after flashing usblsafe, flash the firmware then flash the webui

Note that you're trying this at your own risk, even though usblsafe won't cause problems in a normal circumstance
This post was last modified: 10-06-2020, 11:00 AM by X3non.
israeljay30
israeljay30
israeljay30
Newbie
4
11-06-2020, 03:20 PM
#3
(10-06-2020, 10:58 AM)X3non
(09-06-2020, 05:16 PM)Thskisraeljay30 Good day everyone. May I kindly ask your assistance regarding my Huawei B315s-608 router. Initially, the router was not able to receive signal even if I change the SIM cards. I reset it but it was not able to come back to its factory setting. I was looking for help on youtube and tried USB Balong Downloader but I noticed that there was no specific USB loader for this B315 variant. Could you kindly help me with this? Thank you so much for your help.

you shouldn't use usbloader unless you're aware of the risk, try using usblsafe for b315 instead @ http://www.mediafire.com/file/7skkegaaqm...5.zip/file
you'll still need to look for firmwares for your device though. i think your device should be able to use same firmware as b315s-22 (not 100% sure though)
you can try using the modified firmware v21.329 @ http://www.mediafire.com/file/56s7oxebvo...0.rar/file & modified-webui @ http://www.mediafire.com/file/kf75qgmwwe...7.rar/file

after flashing usblsafe, flash the firmware then flash the webui

Note that you're trying this at your own risk, even though usblsafe won't cause problems in a normal circumstance
Thank you so much for the quick response X3non. I really appreciate it.  I will be trying this and report the outcome.
israeljay30
israeljay30
israeljay30
Newbie
4
12-06-2020, 04:56 PM
#4
(11-06-2020, 03:20 PM)israeljay30
(10-06-2020, 10:58 AM)X3non
(09-06-2020, 05:16 PM)Thskisraeljay30 Good day everyone. May I kindly ask your assistance regarding my Huawei B315s-608 router. Initially, the router was not able to receive signal even if I change the SIM cards. I reset it but it was not able to come back to its factory setting. I was looking for help on youtube and tried USB Balong Downloader but I noticed that there was no specific USB loader for this B315 variant. Could you kindly help me with this? Thank you so much for your help.

you shouldn't use usbloader unless you're aware of the risk, try using usblsafe for b315 instead @ http://www.mediafire.com/file/7skkegaaqm...5.zip/file
you'll still need to look for firmwares for your device though. i think your device should be able to use same firmware as b315s-22 (not 100% sure though)
you can try using the modified firmware v21.329 @ http://www.mediafire.com/file/56s7oxebvo...0.rar/file & modified-webui @ http://www.mediafire.com/file/kf75qgmwwe...7.rar/file

after flashing usblsafe, flash the firmware then flash the webui

Note that you're trying this at your own risk, even though usblsafe won't cause problems in a normal circumstance
Thank you so much for the quick response X3non. I really appreciate it.  I will be trying this and report the outcome.


Good day again. May I ask if you have a Balong USB Downloader designed for Huawei B315 router? I think the one I have is designed for different router so it would not load the files that X3non gave me namely: usblsafe; Firmware; and WebUI. I was searching the internet for this Balong USB downloader compatible for B315 but I could not find it. Could you kindly assist me?

Your help is greatly appreciated. Thank you so much in advance.
israeljay30
israeljay30
israeljay30
Newbie
4
12-06-2020, 05:06 PM
#5



(12-06-2020, 04:56 PM)israeljay30
(11-06-2020, 03:20 PM)israeljay30
(10-06-2020, 10:58 AM)X3non
(09-06-2020, 05:16 PM)Thskisraeljay30 Good day everyone. May I kindly ask your assistance regarding my Huawei B315s-608 router. Initially, the router was not able to receive signal even if I change the SIM cards. I reset it but it was not able to come back to its factory setting. I was looking for help on youtube and tried USB Balong Downloader but I noticed that there was no specific USB loader for this B315 variant. Could you kindly help me with this? Thank you so much for your help.

you shouldn't use usbloader unless you're aware of the risk, try using usblsafe for b315 instead @ http://www.mediafire.com/file/7skkegaaqm...5.zip/file
you'll still need to look for firmwares for your device though. i think your device should be able to use same firmware as b315s-22 (not 100% sure though)
you can try using the modified firmware v21.329 @ http://www.mediafire.com/file/56s7oxebvo...0.rar/file & modified-webui @ http://www.mediafire.com/file/kf75qgmwwe...7.rar/file

after flashing usblsafe, flash the firmware then flash the webui

Note that you're trying this at your own risk, even though usblsafe won't cause problems in a normal circumstance
Thank you so much for the quick response X3non. I really appreciate it.  I will be trying this and report the outcome.


Good day again. May I ask if you have a Balong USB Downloader designed for Huawei B315 router? I think the one I have is designed for different router so it would not load the files that X3non gave me namely: usblsafe; Firmware; and WebUI. I was searching the internet for this Balong USB downloader compatible for B315 but I could not find it. Could you kindly assist me?

Your help is greatly appreciated. Thank you so much in advance.

Here is the picture of the Balong USB Downloader when I am flashing the usblsafe, Firmware and WebUI. I don't see any progress indication at the bottom.
Attached Files
.jpg
Image.jpg
Size: 401.7 KB / Downloads: 7
X3non
X3non
X3non
Recognized Contributor
22,062
13-06-2020, 10:46 AM
#6
(12-06-2020, 05:06 PM)israeljay30 Here is the picture of the Balong USB Downloader when I am flashing the usblsafe, Firmware and WebUI. I don't see any progress indication at the bottom.

you're meant to flash only usbsafe using balong downloader not including the firmware & webui
Twnes
Twnes
Twnes
Newbie
1
26-06-2020, 10:34 PM
#7
(10-06-2020, 10:58 AM)X3non
(09-06-2020, 05:16 PM)israeljay30 Good day everyone. May I kindly ask your assistance regarding my Huawei B315s-608 router. Initially, the router was not able to receive signal even if I change the SIM cards. I reset it but it was not able to come back to its factory setting. I was looking for help on youtube and tried USB Balong Downloader but I noticed that there was no specific USB loader for this B315 variant. Could you kindly help me with this? Thank you so much for your help.

you shouldn't use usbloader unless you're aware of the risk, try using usblsafe for b315 instead @ http://www.mediafire.com/file/7skkegaaqm...5.zip/file
you'll still need to look for firmwares for your device though. i think your device should be able to use same firmware as b315s-22 (not 100% sure though)
you can try using the modified firmware v21.329 @ http://www.mediafire.com/file/56s7oxebvo...0.rar/file & modified-webui @ http://www.mediafire.com/file/kf75qgmwwe...7.rar/file

after flashing usblsafe, flash the firmware then flash the webui

Note that you're trying this at your own risk, even though usblsafe won't cause problems in a normal circumstance

Hi, am hoping you would assist me with what universal firmware would work for a B315s-607. I saw a video on youtube which used the same files you've shared here but I thought to ask, you might be familiar with it.
X3non
X3non
X3non
Recognized Contributor
22,062
27-06-2020, 11:00 AM
#8
(26-06-2020, 10:34 PM)Twnes Hi, am hoping you would assist me with what universal firmware would work for a B315s-607. I saw a video on youtube which used the same files you've shared here but I thought to ask, you might be familiar with it.

yes, the b315s-607 model uses the same files
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram