REALME C2 IN.BIN FILE
REALME C2 IN.BIN FILE
03-02-2020, 09:02 AM
(02-02-2020, 05:09 AM)Squall080684 So sad to hear that,, also how can i flash in fastboot mode without using any software? I know that i its possible if the usb debugging is open. Pls correct me if i'm wrong.
Thanks in advance...
you don't need usb debugging to flash using fastboot, instead you need an already unlocked bootloader (which i think you have)
vol down + power button should boot your device into fastboot
if drivers are not installed already then see https://www.hovatek.com/forum/thread-588.html
to flash full firmware, run flash.bat
to flash specific files like in your case you only really need stock boot and system
Code:
fastboot flash boot boot.img
fastboot flash system system.imgLearn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
05-02-2020, 02:28 AM
(03-02-2020, 09:02 AM)X3non(02-02-2020, 05:09 AM)Squall080684 So sad to hear that,, also how can i flash in fastboot mode without using any software? I know that i its possible if the usb debugging is open. Pls correct me if i'm wrong.
Thanks in advance...
you don't need usb debugging to flash using fastboot, instead you need an already unlocked bootloader (which i think you have)
vol down + power button should boot your device into fastboot
if drivers are not installed already then see https://www.hovatek.com/forum/thread-588.html
to flash full firmware, run flash.bat
to flash specific files like in your case you only really need stock boot and system
Code:fastboot flash boot boot.img fastboot flash system system.img
Sir i cant thank you enough for all the reply for this thread, i will try to do this method and sorry for the late response i need to fix my laptop. Thank you so much sir for all the help i will give you a feedback once i apply the method that you've gave me.
Many thanks and more power hovatek fam.
This post was last modified: 05-02-2020, 05:02 PM by X3non.
05-02-2020, 12:34 PM
(05-02-2020, 02:28 AM)Squall080684(03-02-2020, 09:02 AM)X3non(02-02-2020, 05:09 AM)Squall080684 So sad to hear that,, also how can i flash in fastboot mode without using any software? I know that i its possible if the usb debugging is open. Pls correct me if i'm wrong.
Thanks in advance...
you don't need usb debugging to flash using fastboot, instead you need an already unlocked bootloader (which i think you have)
vol down + power button should boot your device into fastboot
if drivers are not installed already then see https://www.hovatek.com/forum/thread-588.html
to flash full firmware, run flash.bat
to flash specific files like in your case you only really need stock boot and system
Code:fastboot flash boot boot.img fastboot flash system system.img
Sir i cant thank you enough for all the reply for this thread, i will try to do this method and sorry for the late response i need to fix my laptop. Thank you so much sir for all the help i will give you a feedback once i apply the method that you've gave me.
Many thanks and more power hovatek fam.
Sir just now I've successfully unbrick my realme c2 with all of your patience and guide. Thank you so much for your help God Bless you and more power hovatek fam.
This post was last modified: 05-02-2020, 05:02 PM by X3non.
02-04-2020, 05:28 PM
(02-04-2020, 04:32 PM)mvp467 sir the same bootloop thing has happened to my device
but i cannot access fastboot mode to flash files since i've a locked bootloader
what should i do?
Please create a new thread, this is someone else’s support thread.
Go to https://www.hovatek.com/forum and click Ask Question at the top to post a new thread.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
