Teclast P10S Dead
Teclast P10S Dead
03-01-2020, 04:41 PM
Hello,
I tried to flash the last original firmware at a tablet Teclast P10S (UNISOC SC9863A) and the update got interrupted by unplug the cable after it got stuck flashing boot.img.
So it's dead from 6 days now. It doesn't charge, the buttons won't do nothing and the computer won't see anything when the tablet is plugged.
I opened it and remove the battery that still have charge (had to unweld it). Stills the same.
Do you think that it can be save?
Thanks
03-01-2020, 09:04 PM
(03-01-2020, 04:41 PM)Dr4v3n Hello,
I tried to flash the last original firmware at a tablet Teclast P10S (UNISOC SC9863A) and the update got interrupted by unplug the cable after it got stuck flashing boot.img.
So it's dead from 6 days now. It doesn't charge, the buttons won't do nothing and the computer won't see anything when the tablet is plugged.
I opened it and remove the battery that still have charge (had to unweld it). Stills the same.
Do you think that it can be save?
Thanks
retry flashing the firmware again, your pc should be able to detect the device now
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
04-01-2020, 09:19 AM
(03-01-2020, 09:36 PM)Dr4v3n Thanks but the computer don't detect it.
when you connect the battery then connect the phone to the PC using USB, do you hear any connection sound? does device manager refresh?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
04-01-2020, 06:15 PM
(03-01-2020, 09:36 PM)Dr4v3n Thanks but the computer don't detect it.
In device manager, set it to show all hidden drivers then uninstall all SPD drivers.
Re-install SPD drivers after that then retry flashing
This post was last modified: 04-01-2020, 06:16 PM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
04-01-2020, 07:32 PM
And I did a fresh install of the drivers in an new computer.
Next monday I'll try to weld it when connected top the PC if you think that can help.
06-01-2020, 02:21 AM
(04-01-2020, 07:32 PM)Dr4v3n No sound or Device manager refresh but I only did it after reconnect the battery (because of the weld).
And I did a fresh install of the drivers in an new computer.
Next monday I'll try to weld it when connected top the PC if you think that can help.
ensure that you held vol down button before connecting the device to the PC for detecting
if you did and no sound / device manager doesn't refresh, you should consider resoldering the battery properly again before retrying
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
07-01-2020, 10:59 PM
(06-01-2020, 06:50 PM)Dr4v3n I didn't nothing yet but something changed.
Finally it's draining charge from the charger. It doesn't show anything but is draining power and until today wasn't.
so the device is able to charge now? if yes, can it also be detected on the pc?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
08-01-2020, 06:39 PM
(06-01-2020, 06:50 PM)Dr4v3n I didn't nothing yet but something changed.
Finally it's draining charge from the charger. It doesn't show anything but is draining power and until today wasn't.
Just leave it to charge
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
