Home Forum Blog Private Support Courses Archive
Our courses are now on YouTube! Start Watching
Hovatek Forum HARDWARE Routers Hauwei B310s-22 network not unlocking

Hauwei B310s-22 network not unlocking

Hauwei B310s-22 network not unlocking

tchek
tchek
tchek
Newbie
2
08-09-2019, 02:33 PM
#1



Good morning all,
I have successfully flashed my Huawei B310s-22 with firmware 21.321.03.00.00, after the modem reboot COMs Ports didn't appeared so i can't get the pattern to calculate the unlock code.
When i use firmware 21.300.07.00.00 the device won't start. It stuck on power led blinking.
On other B310s-22 devices i used firmware 21.300.07.00.00 and after flashing the device COMs Ports appeared so i can complete de unlock process.
Thanks for your help.
hovatek
hovatek
hovatek
Administrator
51,059
09-09-2019, 11:38 AM
#2
(08-09-2019, 02:33 PM)tchek Good morning all,
I have successfully flashed my Huawei B310s-22 with firmware 21.321.03.00.00, after the modem reboot COMs Ports didn't appeared so i can't get the pattern to calculate the unlock code.
When i use firmware 21.300.07.00.00 the device won't start. It stuck on power led blinking.
On other B310s-22 devices i used firmware 21.300.07.00.00 and after flashing the device COMs Ports appeared so i can complete de unlock process.
Thanks for your help.

try using firmware ver 21.321.xx @ https://mega.nz/#!aaJmVaaA!NRBHJL1Jb3ztf...XDx-35bMcs or higher if you can find any
This post was last modified: 09-09-2019, 01:19 PM by X3non.

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
tchek
tchek
tchek
Newbie
2
09-09-2019, 12:31 PM
#3
(09-09-2019, 11:38 AM)X3non
(08-09-2019, 02:33 PM)tchek Good morning all,
I have successfully flashed my Huawei B310s-22 with firmware 21.321.03.00.00, after the modem reboot COMs Ports didn't appeared so i can't get the pattern to calculate the unlock code.
When i use firmware 21.300.07.00.00 the device won't start. It stuck on power led blinking.
On other B310s-22 devices i used firmware 21.300.07.00.00 and after flashing the device COMs Ports appeared so i can complete de unlock process.
Thanks for your help.

try using firmware ver 21.321 or higher
Thanks.
I used firmware 21.321.03.00.00 but COMs Ports won't appear and the Network are still locked.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)