[Tutorial] How to revive a totally dead Mediatek device
[Tutorial] How to revive a totally dead Mediatek device
28-08-2014, 07:03 AM
(25-08-2014, 12:46 PM)hovatek1. It is the mtk stock backup which i downloaded here (boot, ebr1, lk, logo, mbr, MT6572_Android_scatter, preloader, recovery, secro & system).(25-08-2014, 12:12 PM)StvOchi Still no change. Please help me.
1. List the files in your backup folder
2. what does SP flash tool show when you try flashing files
2. Sp flash tool loads the red bar then brings this error
4032) S_FT_ENABLE_DRAM_FAIL or just brings this error: (1013) S_COM_PORT_OPEN_FAILI have run out of ideas on what to do.
28-08-2014, 07:19 AM
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
28-08-2014, 07:24 AM
(28-08-2014, 07:19 AM)hovatek Have you read http://www.hovatek.com/forum/showthread.php?tid=439 ?I have tried all that but still no change
28-08-2014, 07:25 AM
(28-08-2014, 07:19 AM)hovatek Have you read http://www.hovatek.com/forum/showthread.php?tid=439 ?I have tried all that but still no change.
28-08-2014, 07:26 AM
Please, give a brief summary of what happened to the phone
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
28-08-2014, 07:37 AM
(28-08-2014, 07:26 AM)hovatek Please, give a brief summary of what happened to the phoneI installed chainfire 3d on my rooted phone which made my phone stuck after the tecno animation logo. i tried installing cw recovery using mtk droid tools but that made it stuck at the 1st tecno logo when switching on the phone. So I used sp flash tool and flashed a preloade.bin I downloaded from this site and now when i try to flash the other files is what i'm unable to do. Now when i press the on button the phones only vibrates.
This post was last modified: 28-08-2014, 08:02 AM by StvOchi.
28-08-2014, 10:52 AM
(28-08-2014, 07:37 AM)StvOchi I installed chainfire 3d on my rooted phone which made my phone stuck after the tecno animation logo. i tried installing cw recovery using mtk droid tools but that made it stuck at the 1st tecno logo when switching on the phone. So I used sp flash tool and flashed a preloade.bin I downloaded from this site and now when i try to flash the other files is what i'm unable to do. Now when i press the on button the phones only vibrates.
Apparently, your second move was wrong. It had nothing to do with preloader.bin , only system.img . This shouldn't be much of a problem. Whats the phone model?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
28-08-2014, 03:55 PM
(28-08-2014, 10:52 AM)hovatek(28-08-2014, 07:37 AM)StvOchi I installed chainfire 3d on my rooted phone which made my phone stuck after the tecno animation logo. i tried installing cw recovery using mtk droid tools but that made it stuck at the 1st tecno logo when switching on the phone. So I used sp flash tool and flashed a preloade.bin I downloaded from this site and now when i try to flash the other files is what i'm unable to do. Now when i press the on button the phones only vibrates.
Apparently, your second move was wrong. It had nothing to do with preloader.bin , only system.img . This shouldn't be much of a problem. Whats the phone model?
Tecno M3
28-08-2014, 04:05 PM
mtk driva, it also says instald bt may nt
be able to work corectly. Thirdly, even
wen i wnt 4mat, i got same ero. Nd nw
self d fone refus 2 boot half way again. It
wil only vibrate. Plz help me o
as i sucesfuly flashd in recovery.img, preloader.bin, uboot.bin, nd d fone even refuse to boot into cwn recovery mood. If i on d fone, it wil jst vibrat 4 tymz. Even refuse to show d blue led light wen chagn. Ma fone Tecno Q1
This post was last modified: 28-08-2014, 04:12 PM by mboy13.
28-08-2014, 04:57 PM
(28-08-2014, 03:55 PM)StvOchi Tecno M3
Do you have the complete MTK backup for m3 there?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Users browsing this thread:
3 Guest(s)
3 Guest(s)
