Infinix Hot 6 X606D secure boot download error
Infinix Hot 6 X606D secure boot download error
(26-06-2019, 07:08 PM)kelebzy Infinix released an upgrade on the Hot 6 that is bricking devices.
I tried flashing with SP flashtool but get error 5000 due to Hot 6 secure boot. So i tried using the custom DA for x606 on your site but the problem still persist.
How else can i flash the rom pls. I even tried softwareDownload tool but it also had a problem in DA
(27-06-2019, 10:36 AM)X3nonNo i didn't format the phone with SP flashtool,i used the download only option.(26-06-2019, 07:08 PM)kelebzy Infinix released an upgrade on the Hot 6 that is bricking devices.
I tried flashing with SP flashtool but get error 5000 due to Hot 6 secure boot. So i tried using the custom DA for x606 on your site but the problem still persist.
How else can i flash the rom pls. I even tried softwareDownload tool but it also had a problem in DA
while flashing using sp flash tool, did you format the phone?
are you using latest version of software download tool? attach full screenshot of the error messages you got, upload the screenshots to imgur.com
(26-06-2019, 07:08 PM)kelebzy Infinix released an upgrade on the Hot 6 that is bricking devices.
I tried flashing with SP flashtool but get error 5000 due to Hot 6 secure boot. So i tried using the custom DA for x606 on your site but the problem still persist.
How else can i flash the rom pls. I even tried softwareDownload tool but it also had a problem in DA
(30-06-2019, 05:29 AM)Calvinzo14 I format my Infinix whole X606D and is Dead. Is thea any solution
Sent from my SM-G920F using Hovatek Mobile
(03-07-2019, 08:46 AM)assande WHAT WAS THE SOLUTION?I FI flased mine with x606 firmware and set is deadUse SPflashtool with X606D firmware and custom DA file
all x606d da file I got cant boot thee phone
here is log with nck box
Exe version: NCKBox AndroidMTK 2.0
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM21)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
First stage DA fail, aborting
[SECURE BOOT]Not supported by exe or wrongly selected phone
If model is listed, please select correct model from list
If model is not listed, use factory DA LOADER
Try also to boot phone in brom mode(for some phones this work)
BBCHIP MT6580
Boot Fail.!!!.
[0]All done.