Techno w4 stock on experience smartlife now

isyrecord
Senior Member

137

15-04-2019, 04:58 PM

#1

After I flash this device It still remain the way it was
Techno w4 stock on experience smartlife now please help me out

freshtyt
Senior Member

2,949

15-04-2019, 06:22 PM

#2

(15-04-2019, 04:58 PM)isyrecord After I flash this device It still remain the way it was
Techno w4 stock on experience smartlife now please help me out

after flashing the phone booted straight back to homescreen without going through the initial setup?
if yes, then the emmc chip if faulty and requires reballing or replacing, take this to an experienced phone hardware technician

isyrecord
Senior Member

137

15-04-2019, 09:57 PM

#3

How can I boot straight back to homescreen without going through the initial setup?

if yes, then the emmc chip if faulty and requires reballing or replacing, take this to an experienced phone hardware technician

EMMANUS
Senior Member

1,677

15-04-2019, 11:56 PM

#4

He was asking.
State in details; the phone's behaviour before and after flashing.

isyrecord
Senior Member

137

16-04-2019, 09:25 AM

#5

(15-04-2019, 11:56 PM)EMMANUS He was asking.
State in details; the phone's behaviour before and after flashing.

It stock on experience smartlife now before, and after flashing, that was the problem led me to flash it and after flashing it remains the same

freshtyt
Senior Member

2,949

16-04-2019, 10:47 AM

#6

(16-04-2019, 09:25 AM)isyrecord It stock on experience smartlife now before, and after flashing, that was the problem led me to flash it and after flashing it remains the same

it doesn't hurt to type full explanation rather than a short one
did you check the build number of the phone before flashing?
and did you try factory resetting the phone after flashing?

isyrecord
Senior Member

137

16-04-2019, 11:35 AM

#7

(16-04-2019, 10:47 AM)freshtyt
(16-04-2019, 09:25 AM)isyrecord It stock on experience smartlife now before, and after flashing, that was the problem led me to flash it and after flashing it remains the same

it doesn't hurt to type full explanation rather than a short one
did you check the build number of the phone before flashing?
and did you try factory resetting the phone after flashing?

The phone can't boot so I can't get the buil number ,
And I reset factory settings after flashing

X3non
Recognized Contributor

22,062

17-04-2019, 09:12 AM

#8

(16-04-2019, 11:35 AM)isyrecord The phone can't boot so I can't get the buil number ,
And I reset factory settings after flashing

unable to boot is different from unable to power on
if your phone could not boot, you could still retrieve build number from the phone (refer to https://www.hovatek.com/forum/thread-16005.html ) ,
you cant do that now as you've wiped away the previous OS, now its down to trial and error. you can try other W4 firmwares listed @ https://www.hovatek.com/forum/thread-19339.html ; for each firmware you should flash boot, recovery and system and factory reset in recovery mode then check if the phone boots into homescreen

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions